1. Go to the link provided for Turbine Wasatch Printer in Downloads
2. Copy the folder in Windows
3. Navigate to the C:/
4. Double click on the C:/ Drive
5. Create a Turbine folder or the printer app folder into it
6. Paste in the folder and verify the folder for the Printer app exists
7. Double click here to edit the configuration file. If prompted, open it using Notepad
8. You will need to edit the following fields:
machineToken - Found in Admin > Users for the printer
apiEndpoint - Should already be setup, but set to:
9. Click on Windows Icon to Search for Wasatch
10. Open Wasatch application
# Wasatch SoftRIP
11. Click Ok to any prompts
12. Click on Queues
13. Ensure both Print Unit 1 and 2 are Checked
14. Click on Unit Options
15. For Print Unit 1, make sure Hold for Layout is Checked
16. Click on Server and Server Startup
17. Check the box next to Start HTTP Service and Click OK
18. Click here
19. Close Wasatch and Restart it
# Windows Explorer
20. Open a web browser and navigate to Admin > Users
21. Search for DTF, Press Enter
22. Double click here to copy the printer API Key
# Editor
23. Paste the API Key in the machineToken field
24. Save the file
# Windows Explorer
25. Back in Windows, open the OJ_Printer.exe application
# OJ_printer
26. If successful, the application should display the printer name in the top right corner
27. Login with your Turbine employee PIN Number
28. Press Enter
29. Check that your name Displays Next to Operator
30. Click here to Enter an Order ID
31. You can search in Turbine for open Orders under Manage > Orders
32. Click here
33. Any Order ID can be used to test from a DTF order
34. Once inputted, hit Load or Enter if Wasatch is running, open it if no
35. Check Wasatch, the Order should now be processing in the Queues
