If this is the first time you are using the equipment please read the following guides:
a. How to assemble and activate your gateway
b. How to activate and discover your sensors and your repeaters, and,
c. How to discover your devices on the platform.**
This article assumes that you have read through "I am losing sensor readings"
Is the Solar-Charger operational?
Step 1: Locate and open the gateway outer casing.
Step 2: Visually inspect the Chargers indicator lights (Click here for reference). Under normal operation one of the three colored lights should be solidly lit at a time.
Operation mode | Blue LED | Yellow Led | Green Led |
Not charging | Blinking | off | off |
Bulk charging | Solidly Lit | off | off |
Absorption | off | Solidly Lit | off |
Float | off | off | Solidly Lit |
Is the Solar-Charger displaying an error?
Step 1: Locate and open the gateway outer casing.
Step 2: Visually inspect the Chargers indicator lights (Click here for reference).Operation mode
Operation mode | Blue LED | Yellow Led | Green Led |
The chargers temperature is too high | off | off | Blinking |
Charger over-current | Blinking | off | off |
Charger or panel over-voltage | off | Blinking | off |