How to update SmartCam Firmware

NOTE: Firmware must be updated to install other sensors

Rob Wilson avatar
Written by Rob Wilson
Updated over a week ago

To update your SmartCam firmware please follow the steps below. Please note that you will need to do this for each SmartCam separately. If the update takes longer than 10 minutes then please force quit the Hedge app and check if the firmware successfully updated. If not, then reboot the SmartCam and try again. 

  1. Open the Hedge app and click on the SmartCam you would like to check / download the firmware on. 

2. Click on the setting gear in the top right of the Hedge app then scroll down to the bottom of the page. 

3. Find the firmware setting. If it says "Up to date", then it's on the latest version of the firmware and there is nothing more for you to do. If it says update available, just click on it to download the firmware.   

If you have trouble please contact the technical support team. 

Did this answer your question?