This process guides you through how to disassociate a Beacon from a vehicle using AuctionTrac. Usually, the Gate App is used to disassociate a Beacon during check out. However, AuctionTrac is used in some cases (eg. the vehicle is leaving on a work pass or the vehicle is being checked out with AMS).
Before following this guide, make sure to physically remove the Beacon, tether, and magnet from the vehicle. The following list provides guidance on common Beacon installation spots:
Location | Notes |
Front driver’s side visor | The most common location |
Front driver’s side door handle | Used if there is no visor or the visor is damaged. |
Rear-view mirror | Used if the door handle was not viable. |
1. Open AuctionTrac and go to the Account Profile.
2. Verify the current location.
3. Change the Role.
A. Tap Change Role
B. Tap Check In.
4. Unpair the beacon from the vehicle.
A. Tap the door icon.
B. Tap Check Out.
C. Scan the VIN.
D. Scan the beacon.
5. Tap Check Out.
AuctionTrac associates the vehicle and the beacon.
6. Return the Beacon to storage.