By default a rule acts as soon as its conditions match. Turn on approval and it still checks on schedule, but nothing reaches Meta until a person says yes.
Use it for anything that moves money while you are still learning what a rule does.
Turn on approval
In the rule builder, open the Ask for Approval section.
Turn on Ask a person before this rule changes anything.
Under Choose an app, pick Slack or Email.
In Send to, choose the channel or person who will answer. Leave this empty and nobody is asked, so the rule cannot act.
Write the Message, the question the approver reads. The notification placeholders work here too, so
Pause {count} {level}?reads as "Pause 2 ad sets?".Optional: turn on Show the change we plan to make to add a line such as "Daily budget $50.00 → $60.00". Worth it for budget and bid changes, where size and direction are what the approver is judging.
Under If nobody answers, set how long to wait. The range is 4 hours to 3 days.
Choose Stop the run or Continue anyway.
Stopping is safer, continuing is faster. For a pause that saves money, continuing is reasonable. For a budget increase, stop.
How to tell it worked
The Approval step in the Rule Flow changes from "No approval needed" to the wait time, for example "Waits 24 hours". The next time the rule matches something, a request appears in Automation > Approvals instead of the change going straight to Meta.
Answer a request
A request arrives in Slack or by email, but you do not have to answer it there. Every request also appears in Adnova.
Go to Automation > Approvals.
Optional: switch to My items for the ones addressed to you, or filter by Pending.
Click Approve or Reject on the card.
Approve sends it on, after re-checking it against live numbers. If the ad set recovered in the meantime the action is skipped, and the card reads "No longer applied".
Reject discards this request only. It does not switch the rule off, so if the conditions still hold at the next check the rule asks again. Reject means "not this time". To mean "not at all", pause the rule.
To answer several, tick the cards and click Approve selected. There is no bulk reject, because a refusal would just be asked again on the next check.
If you cannot approve something
A card reading "Somebody with access to this ad account has to answer this one" needs a person whose own Meta access covers that account. Approval is authorised as the person answering, not as the person who built the rule.
What the outcomes mean
Outcome | What happened |
Approved and applied | Someone said yes and the change went through. |
No longer applied, so nothing was changed | Someone said yes, but the numbers had moved and the action no longer matched. |
Nobody answered, so nothing was changed | The request expired on a rule set to Stop the run. |
Nobody answered, and the rule went ahead | The request expired on a rule set to Continue anyway. |
The last two are the same event with opposite settings. If you see "the rule went ahead" and did not expect it, the rule's If nobody answers is set to continue.
Common questions
Can I approve from Slack? Yes, the request carries its own buttons. The Approvals page is there for when you would rather answer in one place.
Can I undo an approval? No. Reverse the change in Ads Manager, and pause the rule so it does not ask again.
Next
See what the rule did once an approval went through: How to read your automation logs


