Skip to main content

Troubleshoot: placement dimension rejected

What to do when a launch is blocked because no placement is configured for a creative's dimension.

Written by Team adnova

A launch stops with a message like story.mp4 is 9×16, but no placement is configured for that dimension. Please configure it in Configure Placements. It means one shape in Configure Placements has been left with no placements, so a creative of that shape has nowhere to be shown.


​

1. Where the message appears
It sits in red under the creative in the launch table and blocks the launch. If the ad slips through in a bigger batch, the ad launcher fails that one ad with the same words and the rest of the batch still goes out.


​

2. Why it happens
Open Setup - Configure Placements. The screen has three columns: 1×1 or 4×5, 9×16 for portrait and 16×9 for landscape and right column. If every placement has been dragged out of the 9×16 or the 16×9 column, a multi-placement ad holding a creative of that shape has no rule to serve it, so Meta would reject the ad.


​

3. Put a placement back
Drag at least one placement into the empty column. You can also pick a row up with the keyboard: focus it, press Space, move with the left and right arrows and press Space again to drop it.


​

4. Save and launch again
Click Save. Back on Launch the message is gone and the ad can go out. Reset beside Save puts the default set of placements back if you would rather start over.


​

Good to know

  • Only Multi-Placement ads are checked. A single image or video ad, a carousel or a flexible ad never raises it.

  • It can only happen on an ad account where Configure Placements has been customised. If you have never moved a placement, the check does nothing.

  • 9×16 covers portrait creatives. 16×9 covers true landscape and Meta's 1.91:1 link format, both within about 5 percent.

  • The message names the first offending file. If several creatives are the wrong shape, fix the column once and they all clear together.

  • Placement targeting on the ad set is a different setting. It is not what this message is about.

Did this answer your question?