Skip to main content
All CollectionsGetting StartedSupported Devices and Components
Supported Hardware Components for the Raspberry Pi 4
Supported Hardware Components for the Raspberry Pi 4

See which hardware components of the Raspberry Pi 4 our virtual devices support.

avhsupport avatar
Written by avhsupport
Updated over 2 years ago

Note: This information is up-to-date as of 6/6/2022.

High-Level Summary

The virtualized Raspberry Pi 4 board models the following:

  • SoC

    • Broadcom BCM2711B0 quad-core A72 (ARMv8-A) 64-bit, runs as Neoverse-N1
      ​

  • GPU

    • Broadcom VideoCore VI (partially modeled)
      ​

  • Networking

    • Gigabit Ethernet
      ​

  • RAM

    • 1GB, 2GB, or 4GB LPDDR4 SDRAM
      ​

  • GPIO

    • 40-pin GPIO header, populated (user can model using vMMIO)
      ​

  • Storage

    • microSD
      ​

  • Ports

    • 2 × micro-HDMI 2.0

    • 3.5 mm analog audio-video jack

    • 2 × USB 2.0

    • 2 × USB 3.0

    • Camera Serial Interface (CSI)

Did this answer your question?