Skip to main content

How do I set up a project map and places of interest on the dashboard?

On the Map tab of a project on the Assignar dashboard, you can draw the site's boundary (a geo-fence) and mark places of interest, such as the site entrance, the site office or a laydown area.

On the Map tab of a project on the Assignar dashboard, you can draw the site's boundary (a geo-fence) and mark places of interest, such as the site entrance, the site office or a laydown area. Workers on the project can see the map, with these points, on the Assignar mobile app. You need the Add Projects/Clients user access module.

Your company can rename some words in Assignar, so you might see a different word for Project. This article uses the default words.

Before you start

  • Give the project an address on its Details tab first. The map opens on the project address, and the address appears as its own point.

  • A project has one geo-fence. Delete it to draw a new one.

Open a project's map on the dashboard

To open a project's map on the Assignar dashboard:

  1. Go to Project Data > Projects.

  2. Click the project's row, for example Kent St Stormwater Upgrade.

  3. Click the Map tab.

The map shows the project address and any saved geo-fence and places of interest. The panel on the left has two sections: Geo-fence and Places of interest.

Draw a geo-fence for a project on the dashboard

A geo-fence is the outline of the site. To draw a project's geo-fence on the Assignar dashboard:

  1. On the project's Map tab, click Add geo-fence in the Geo-fence section.

  2. Click on the map at each corner of the site. Each click adds a point.

  3. If you misplace a point, click Undo Last Point in the toolbar. To start again, click Clear Polygon.

  4. When you have at least 3 points, click Finish Polygon in the toolbar.

The geo-fence is saved straight away. The Geo-fence section shows the project name with Geo-fence active.

To move around the map while drawing, use Pan / Drag in the toolbar.

A project's Map tab on the dashboard with a geo-fence drawn around the site and the Finish Polygon button.

Delete a project's geo-fence on the dashboard

To remove a project's geo-fence on the Assignar dashboard, open the project's Map tab and click Delete beside Geo-fence active. The geo-fence is removed straight away, with no confirmation. You can then draw a new one.

Add a place of interest to a project on the dashboard

A place of interest is a named point on the project map, such as "Site entrance" or "Site office". To add one on the Assignar dashboard:

  1. On the project's Map tab, click Add place of interest in the Places of interest section.

  2. Click the spot on the map.

  3. Type a name in Point name and press Enter.

The point is saved straight away and listed under Places of interest. If you leave Point name empty, no point is added.

The Places of interest section of a project map on the dashboard with two named points.

Delete a place of interest on the dashboard

To remove a place of interest on the Assignar dashboard, open the project's Map tab and click the bin icon beside the point in Places of interest. It is removed straight away, with no confirmation. The project address can't be removed here; change it on the Details tab.

What workers see on the mobile app

Workers allocated to the project can open the shift's map on the Assignar mobile app. It shows the project address, the geo-fence and the places of interest, so they can find their way around the site.

Why won't the project map save on the dashboard?

If the Assignar dashboard shows a message such as "Failed to load map data." or "Delete failed" on the Map tab, the change didn't reach Assignar. Refresh the page and try again. If Finish Polygon doesn't appear, the outline has fewer than 3 points: click the map to add more.

Related articles

Did this answer your question?