Rules and triggers
Rules determine where on your website a pop-up should be displayed.
To set your pop-up’s rules, you will define both triggers and conditions.
The most common rule is to trigger a pop-up when a specific URL is loaded.
Before setting up your conditions and triggers, think about how your pop-up should behave:
Which visitors should see the pop-up?
Are there any visitors who should not see the pop-up? How will you identify them?
Do you want to limit how many times someone will see the pop-up? Should the limit reset after a period of time?
Are there specific pages on your website where the pop-up should show?
Are there specific pages where it should be hidden?
If you have an e-commerce shop, should the contents of a shopping basket affect the pop-up’s visibility?
Triggers are what activate your pop-up.
Once all the conditions are met, the trigger will determine when to display the pop-up
Note: Some of the options listed here depend heavily on the capabilities of your website or CMS provider. Playable is unable to assist in evaluating these capabilities or determining which option is best for your scenario.
Trigger options
Pageload
The default trigger is page load. This means that if all conditions are met, the pop-up will show instantly when the webpage loads. To add a delay to your page load, you will add a trigger, select page load, and set a delay.
Exit Intent
This will display the pop-up when the user moves their mouse cursor up to the URL bar, which indicates that they will leave the webpage.
It's possible to set a delay on your exit intent trigger, though this is not recommended, as you usually want to display the pop-up as quickly as possible in order to catch the user's attention before they leave the page.
Scroll
This will display the pop-up when the user begins to scroll on the page. So if they open the page but don't scroll, the pop-up will not show, even if the conditions are met.
Data Layer Event
Data Layer is a feature of Google Tag Manager. You can read more about Data Layer here. You can also find more information about Data Layer events here.
If you use Data Layer events, you can use these events as pop-up triggers. In your trigger settings, you will give the event and variable names, and then define the condition for the trigger (based on the variable's value).
An example of a dataLayer trigger could be adding a winter related item to your basket:
Combining triggers
You can select more than one trigger for your campaign. In that case, all triggers have to be satisfied before the pop-up will show. So by combining scroll with exit intent, you can trigger an exit intent pop-up that will only show to users who have scrolled the page before leaving.
Note: it is not necessary to add "page load" as a second trigger because page load is the default trigger.
Conditions
There are ten different methods you can use as conditions, some are more advanced than others. The pop-up will only be displayed or hidden if all conditions are met!
URL address
Use the URL address condition to decide which pages on your website the pop-up shows on.
How to set it up
Open your pop-up and go to Pop-Up Settings > Rules.
Add a new condition.
Under Type, choose URL address.
Under Action, choose Show to display the pop-up on matching pages, or Hide to keep it off matching pages.
Enter the address in the URL address field. To add more than one address, click Add URL.
Click Save.
How the matching works
Enter the full address, including
https://, for examplehttps://example.dk/sport.*is a wildcard and means "anything". You can put it at the start, in the middle or at the end of the address.The check ignores everything after a
?and a/at the end of the address.It isn't case-sensitive.
If your URL contains a URL parameter (e.g.
?newsletter=true), only add the base URL here and add the parameter as its own URL parameter condition.
Which URL to enter
Show the pop-up… | Action | URL address |
On the front page only | Show |
|
On every page except the front page | Show |
|
On the whole site | Show |
|
On one page | Show |
|
On a page and all its sub-pages | Show (two URLs, use Add URL) |
|
Only on the sub-pages of a page | Show |
|
On pages whose address contains a word | Show |
|
On both | Show |
|
Everywhere except one page and its sub-pages | Hide |
|
Good to know
https://example.dk/*does not include the front page. This is the most common mistake. To include the front page, usehttps://example.dk*.In the same way,
https://example.dk/sport/*does not include the page/sportitself, only its sub-pages.https://example.dk/sport*also matcheshttps://example.dk/sports-news. To target a page and its sub-pages, use the two-URL version above.https://www.example.dk*doesn't matchhttps://example.dk(without www). If your site works with both, use*example.dk*.With no URL address condition, the pop-up shows on every page of every site where your Playable script is installed.
An address ending in
#something, such ashttps://example.dk/#top, doesn't match the front-page rule. To show or hide the pop-up based on a hashtag, use the Hashtag condition type.
URL parameter
Show or hide a pop-up based on your own URL parameters. An example of this could be if you link to your website from a newsletter with a URL like this: http://www.playable.com/?newsletter=true
The action is set to Hide, the parameter name is newsletter, the condition is set to equal and the value 'true', meaning that if the URL has newsletter in it the pop-up is hidden.
URL regex
Enter a custom regular expression to match against the URL. For example, to show a pop-up for all product categories other than “games”:
For more information on regex see our article here.
UTM parameter
If you add a UTM campaign source and UTM campaign name to match against, you can show or hide a pop-up based on these.
As an example, when a user visits from a URL which includes the following two parameters, utm_source and utm_campaign the action can be set to either Show or Hide the popup.
For more information on UTM parameters, see our article here.
Hashtag
Show or hide the pop-up depending on a specific hashtag. A hashtag comes at the end of the URL, add the text after #. For example:
Cookie
Show or hide a pop-up depending on the name of a cookie set in the browser. For example, if you have a cookie on your website with the name 'show_popup' with the value '1' then you could write the condition as follows:
DataLayer Variable
Show or hide the pop-up based on variables existing in the DataLayer object. Many websites publish in the DataLayer if a user is logged in. For example, a website might have a variable with the name 'loggedin' equal to '1'. Under the condition, you would write:
JS method
Show or hide a pop-up depending on a JavaScript evaluated on your website.
Function name: DisplayPopup
Code example:
window.DisplayPopup = function () {
return true;
};
When the condition is evaluated, it will execute the method and if the value returns true it will show the pop-up.
Display limit
You can limit how often a user will see the same pop-up. This is based on the user's browser cookies. Start by selecting a limit and then set an interval for how often the limit should reset.
Date range
There are three ways to control when your pop-up will be displayed:
Under General settings, you can create a schedule to show the pop-up on certain days of the week and specific times of the day.
Under the Campaign tab, you will set your pop-up’s campaign period (the first and last day it should be displayed).
Under Conditions, you can add some extra date ranges during which you want to hide the pop-up.
We hope that this article has provided you with some clarity when it comes to pop-up rules, triggers and conditions. If you need further assistance, please reach out to our chat support!

