Saas partners can create integration templates, that are made available in their Hub, or that can be fully embedded in their own platform.

Please note: SaaS Admin features are not available in free trial accounts. Please contact us to have your account upgraded to a SaaS Admin account.

A template is a Blend that has a setting "Is template". Once a Blend is turned into a template, it can be made available to customers of the SaaS partner. Towards the customer, the template is referred to as "an integration", for example the "ACME Salesforce integration".

If you have never created an integration (a Blend) on, check “Getting started” video. Please contact your account manager if you would like to create one or more integration templates for you.

A customer will typically click on the button "Use integration", and this will create a copy of the template in the account of the customer. The copy is an actual Blend that will e.g. run automatically according to its schedule or that will be triggered by a Webhook.

Creating a new template

Make sure you are logged in to with your SaaS Admin account. Go to the tab "My integration templates" and click on "Add new template":

This will open the Blend editor with a new blank Blend, and the setting "Is template" will already be turned on. Please make sure to double check a few Settings in the right hand pane under the tab Settings, at the bottom:

  • Template: should be set to "Yes"
  • Status: should be set to "Live" to make the template visible to customers
  • Name: e.g. "ACME Salesforce integration"
  • Description: describe the features and limitations of this integration, you can use markdown to add e.g. titles, bold text, hyperlinks etc. (HTML is not accepted)

Adding a Setup and Settings flow

When the toggle "Is template" is turned on, you can add two extra start blocks to your Blend, a Setup start block and a Settings start block:

Add a Setup block if you want to create a Setup flow. The Setup flow is a Setup Wizard that the customer will see after clicking the button "Use integration". The Setup flow is executed only once. If the customer wants to run the Setup again, she will have to delete the integration and add it again.

Add a Settings block if you want to create a Settings flow. The Settings flow is a Settings Wizard that the customer will see, each time she clicks on the Settings button, on the detail page of the integration. The Settings flow can thus be executed multiple times. Please note that the Settings flow is also executed automatically after the Setup flow, so the Settings Wizard screens are displayed immediately after the Setup Wizard screens.

Defining user inputs for the Setup Wizard

If you want to allow the customer to set options during Setup, add one or more input blocks in the Setup flow. Each block will be displayed as a new consecutive screen in the Setup Wizard. Example:

In the Setup flow, you will typically perform one-time actions, e.g. creation of custom fields, one-time imports etc. You will typically add Conditions to take into account the choices made by the customer. Example:

Make sure to Persist the user inputs, in case you want to remember the choices made by the customer. This is needed when you add e.g. a Condition in the normal run flow of the Blend (under the regular Start block), that references an input from the Setup flow:

Defining user inputs for the Settings Wizard

If you want to allow the customer to set options under Settings, add one or more input blocks in the Settings flow. Each block will be displayed as a new consecutive screen in the Settings Wizard. Example:

Similar to the Setup flow, please make sure to persist user inputs, since you will most likely read these inputs during each run of your Blend:

Reading user inputs from Settings

You will typically read Settings from the customer, in each run of your Blend:

Settings of the template

Make sure to set all the settings of the template on its detail screen:


  • Disable "Run": typically this is set to Yes, so that the customer will not see a "Run" button to run the integration manually. This setting should only be set to "No" for integrations that have to be executed manually, e.g. for a one time import or export
  • Run immediately after Setup: set to Yes
  • Real-time: set to No
  • Template: set to Yes

Setting a schedule

If your integration needs to run on fixed intervals, make sure to add a schedule on the detail page of the template (cannot be done inside the Blend editor):


  • Schedule every: set the interval, only use short intervals (e.g. every 30 seconds or every minute) for short running Blends, typically Blends that use incremental blocks that only process new or updated data
  • Automatically set start time: change this to "No" if your integration needs to run e.g. always at night at 2AM. If set to Yes, the actual start time will depend on the time the integration was activated by the customer
  • Schedule can be changed by user: typically this is set to "No" so that your customer cannot change the schedule
  • Run immediately after Setup: set to Yes

Add the template to a category (group)

Make sure to add the template to at least one category or Group to make it visible in your Hub. Start typing a category name to add it, e.g. "Root" to add it to the main page of the Hub:

Your template in your Hub for customers

Your customer will now be able to find the integration in your Hub or Market Place:

The user can click the integration and click on "Use integration" on its detail screen:

The user will now have to connect the tools used in the integration, and then complete the Setup Wizard (including the Settings Wizard):

Once this is done, the integration is live, and running according to its Schedule or triggered by Webhooks. The user can click on "Settings" at any point in time to change the Settings of the integration. The user can disable the integration or delete it to fully remove it from its account.

Further reading:
Dynamic Field Mapping in Templates

Did this answer your question?