TapDots are a powerful tool for connecting people with your church through a simple tap—but to make the most of them, proper application is key. When installing TapDots on chairs, especially fabric or cushioned surfaces, following a few simple steps will help ensure they stay secure and effective.
Step-by-Step: Applying TapDots to Chairs
Clean the Surface (If Possible):
Before applying, make sure the chair surface is free from dust, lint, or moisture. A quick wipe with a dry cloth can go a long way—especially on smooth or vinyl chairs.Peel Carefully:
Remove the TapDot from its backing, being careful not to touch the adhesive with your fingers too much.Position with Intention:
Choose a flat and easily accessible area on the chair—commonly the top backrest or a visible side panel. Once it touches the surface, repositioning will be difficult.Apply Firm Pressure:
This is the most important step. Press down firmly across the entire TapDot, especially the edges. Hold it for at least 15-30 seconds to activate the adhesive and help it bond to the surface.Let It Cure:
For best results, avoid heavy use or excessive touching of the TapDot for a few hours. The adhesive will continue to strengthen over time.
Tips for Fabric Surfaces
If you’re applying to fabric (such as upholstered chairs or pew seatbacks), use our fabric-specific adhesive TapDots. These have been tested on textured and flexible surfaces—but even with specialty adhesive, applying firm pressure is crucial.
Press deeply into the fabric texture
Hold with both thumbs or use a flat tool like the edge of a credit card
Avoid applying to loose or overly padded surfaces that shift under pressure
Final Thoughts
A TapDot that’s properly applied can last a long time and serve hundreds of guests. Taking the extra 30 seconds to press and hold each one ensures the strongest bond and best performance.
If you need help choosing the right TapDot for your seating setup, reach out to our team—we’re here to help you make the best connection possible.