Skip to main content

2FA - Two Factor Authentication

2FA - Setup and use

Written by Phil Hayes

Two Factor Authentication or 2FA is an optional security enhancement which can be enabled on your CONXTD account.

2FA improves your account security by requiring you to enter a one time passcode either from your authentication app or sent to your email during login.

How to enable 2FA

  • Login to CONXTD

  • Click on your name in the top right and click on 'My Profile'

  • Look for the '2FA' section

  • To enable simply click on the toggle

  • Authentication apps is the default and is recommended, but email is also available as an option if required.

Authentication app

  • Open your preferred authentication app, or download one from your app store

  • Follow your apps add new process and scan the QR code. If you can't scan it, enter the manual code shown next to it instead.

  • Enter the 6 digit code shown by your authenticator app and click Verify and Enable.

  • If the code is incorrect, wait for a new code and try again.

Recovery codes

  • Once the code is accepted, you will be presented with 6 recovery codes which you can use if you lose access to your authenticator app.

  • Copy the codes and paste them somewhere safe, or download them as a .txt file. You can do both.

  • Once you have copied or downloaded them, the buttons change. Tick the confirmation box and click Done

  • 2FA with Authentication app is now setup

Tip: Store your recovery codes somewhere other than the phone that holds your authenticator app, such as a password manager.

Email

We highly recommend you use the authentication app option, but email is also available if required.

  • To setup email, simply click on the 'Email' option

  • 2FA via email is now setup

We recommend all CONXTD users have their own account, with access to the email address.

How to use 2FA

Once enabled, the next time you login to CONXTD, after you have entered your password correct, you will be presented with a message to provide a one time 6 digit code.

Authentication app

  • Open your authentication app, find the current code presented and enter it

  • If you get the code wrong, wait for the next one to show

  • Once the correct code is entered you will be logged in

No access to authenticator app?

  • On the 2FA code screen, click 'Use a recovery code' (bottom right)

  • Enter one of your saved recovery codes and submit

  • If successful, you will be logged in

  • If unsuccessful, try another code

Each recovery code works once. After use it is removed and can't be used again.

You receive an email confirming a recovery code was used. If it wasn't you, reset your password straight away.

If you are unable to locate your recovery codes, click 'Contact support' for further assistance.

Email

  • Simply check your email for the code, enter into the box and click 'Submit code'.

  • Following this, you will be logged into CONXTD as usual.

Didn't receive the code?

  • After 30 seconds, you can request another code to be sent

    • Be sure to check any spam or junk filters just incase

  • Double check the email address is correct - if it is not correct then reach out to support

Did this answer your question?