Stones, elements, text and components all use the same controls for placing and moving.
When you first select one, you will need to place it on your design (double click or double tap on mobile) before you can fine turn the rotation and position.
Positioning
To position use your mouse or trackpad to move the customization on your design. On mobile you can drag with your finger.
It will hug the surface as you move it along your design.
Left Click and Hold to rotate your design.
Scroll to zoom in and out.
Click on any of the Instant View buttons in the Right Hand Corner to position your view and to display the Grid.
Centering and Snapping
By default the customization will show centering guides and will snap (i.e. become sticky when close) to these guides.
This is for easier placement and aligning perfectly in the center.
Using Snapping
Snapping will keep the customization to the center of the object, if the customization isn't moving where you'd like, try disabling snapping and then positioning.
Placing
When you are happy with your selection and position you can place it.
Double Click to place the customization.
Moving and Rotating
Moving can be done once a stone has been placed on a design. You can do a basic move that let's you adjust the placement, an advanced move that let's you adjust the directional placement in a more detailed way, and a rotate. There are three ways to move and adjust after placing. Basic move, Advanced move, and Rotate.
These options can be found on the bottom of the relevant customization's card under Applied.
Basic Move
Basic Move puts the customization back on your cursor and lets you move it while it hugs the surface of the design.
With basic move, the centering and snapping tools will apply again unless you disable snapping using the toggle on the bottom left.
Advanced Move
Selecting Advanced Move will bring up the movement arrows for the customization selected
Clicking on an arrow and dragging in that direction will move the stone in that direction.
When you are done, double click, or click the green checkmark to apply the change or the red cross to undo and go back to your previous position.
Rotate
To Rotate, select rotate from the bottom right on the card of the relevant customization.
When you select the customization to rotate, it will turn red.
Red will tilt up or down.
Green will tilt side to side.
Blue will rotate in a circle.
Deleting
To delete, just click the x on top right of the relevant customization's card.
