There is a way for partners to remove adders from Pricing Modules to be saved as a draft or archived. Follow the following Tutorial:
If an adder cannot be removed because it is being used by a pricing model, follow these steps.
Click settings > pricing > pricing models > default pricing model
Click the x next to the adder. This will remove the adder from the pricing model.
Save changes.
You can now click settings > pricing > adders, and click "active" on the adder and change it to archived or inactive.
20 STEPS
1. The first step is to open Enerflo V2 and click Settings
/p>
2. Click Pricing
/p>
3. Click Adders
/p>
4. When selecting Active if "In use by 1 pricing model" populates there is still a way to make an adder a draft/archived.
/p>
5. Click Settings
/p>
6. Click Pricing
/p>
7. Click Pricing Models
/p>
8. Click Default Pricing Model
/p>
9. Scroll down and click the x next to the adder you wish to archive or make a draft. This will remove the adder from the pricing module.
/p>
10. Click Save Changes
/p>
11. Click Settings
/p>
12. Click Pricing
/p>
13. Click Adders
/p>
14. Scroll down and click Active
/p>
15. Click Draft
/p>
16. Click Draft again to change the Status to Archived
/p>
17. Click Archived
/p>
18. Click Archived in the top right hand corner to view archived adders.
/p>
19. Click Archived to unhighlight and remove archived adders from the list
/p>
20. That's it. You're done.
/p>
" height="725" width="647">
Here is a gif version to watch: