This guide will walk you through adjusting the display position and controlling the brightness settings for your ENGO glasses using the official ENGO app.
Step 1: Access Your Glasses Settings
Open the ENGO app on your smartphone.
Tap the Setup tab at the bottom of the screen.
Under the ENGO 3 menu, you will find all the main configuration sections: Adjust your glasses, Brightness, and Gesture controls.
Step 2: Adjust Image Position
If the display in your glasses is off-center or partially cut off, you can adjust its position digitally:
In the Adjust your glasses section, select "Adjust the image Position".
Use the directional arrows (Up, Down, Left, Right) to shift the display until the image is perfectly centered in your field of view[cite: 1].
If needed, tap Reset at the bottom to return to the default position
(x: 0, y: 0).
Step 3: Set Up Brightness Controls
To ensure optimal visibility in various lighting conditions (bright sunlight or ambient light):
Go back to the Setup main screen.
Locate the Brightness section:
Auto brightness: Toggle the switch ON (yellow) to allow your glasses to automatically adapt to ambient lighting.
Manual Brightness: Toggle Auto brightness OFF and use the slider below to set your preferred brightness level manually.
Additional Tip: Gesture Sensor
Under the Gesture section, ensure Gesture Sensor is enabled. This allows you to double-tap on the right temple of your glasses to easily switch between your display screens while riding or running.
If you need further assistance or still experience alignment issues, feel free to contact ENGO Support!