Take the tools provided with the mudguards. Attention in the box of the mudguards, there are the screws intended for the installation of a luggage rack. Keep them safe.

The rods are packaged to fit in the shipping carton. Before putting them in place, you will have to twist them slightly.

Front mudguard:

City one / City 4speed / City X
Position the light on the front of the fork then the mudguard on the back of it. Once everything is in place, tighten with the Allen key size 5 and the open end wrench size 10.

Comfort
Lightly twist the paste before the mudguard to be able to position it correctly. Once in place, tighten using the 5 mm Allen key and the 10 mm open end wrench.

Comfort X
Attach the rods to the rear of the fender. Will not be totally to be able to adjust the position in a second time. Position the front light, then the mudguard and screw everything onto the arch of the fork. Once the main screw is in place, you can now attach the rods to the bottom of the fork.

Rear mudguard - all models:

The longer rod is for the rear of the bike.

The shorter part of the mudguard should be positioned on top of the rear wheel.

Secure the rods to the mudguard using the small black plates. Will not be at the maximum to be able to adjust the position in a second time. Once the mudguard is positioned, you can attach it to the frame in the two locations provided for this purpose.

Here is a tutorial to know how to assemble the mudguards on your EOVOLT bike :