Easily view asset data from your Rokbak equipment in T3 with the Rokbak Haul Track integration. With a quick setup, you can bring select telematics data from Haul Track-enabled machines directly into your T3 Fleet platform via the AEMP Telematics Standard (ISO 15143-3), no additional hardware required.
For more information on the capabilities of AEMP integrations in T3, check out the T3 OEM Integrations Overview article.
What You Need Before You Start
The Haul Track integration requires a few pre-requisites to ensure a smooth setup.
Asset & Hardware Requirements
Your equipment must have Haul Track installed from the factory, or added later.
Confirm that your machines are activated and reporting to Haul Track. If you’re unsure, contact your Rokbak dealer or support.
Account & Subscription Access
An active Haul Track subscription with machines assigned and sending data.
An active T3 subscription is required.
User Credentials & Permissions
Valid Haul Track OAuth Client Credentials. Don't have credentials?
Client ID
Client Secret
Manager or Admin-Level role within T3.
Setting Up the Haul Track Integration
Log into T3 Fleet.
Navigate to the Company page and select the Integrations tab. The Integrations homepage will display.
Locate the Rokbak integration and select Add integration.
Enter the credentials you received from Rokbak:
Client ID
Client Secret
Note: Your credentials must be requested from Rokbak. See How to Request Your Credentials below to learn more.
Click Submit credentials. T3 will validate the credentials and begin syncing your Haul Track data.
You will be returned to the OEM Integrations page.
The integration status will be Pending while the data imports.
Once the feeds for the equipment in the OEM fleet are available in T3, the status of the card will change to Connected.
Once the integration has a Connected status, you can begin assigning the feeds to assets created in T3. The feeds appear in T3 as tracker devices. For more information, see Assigning a Tracker Device to An Asset in T3.
How to Request Your Haul Track Credentials
To enable the integration, you’ll need to request API credentials directly from your Rokbak dealer.
Who to email:
Contact your Rokbak dealer.
In your message, identify yourself as the Equipment Manager for your assets.
Email template (copy/paste):
Subject: Request for Haul Track API Credentials (AEMP 2.0) for T3 Integration
<Your Company Name> is requesting to pull our Rokbak Haul Track API feed into our T3 platform. I am the Equipment Manager for these assets and am requesting this feed for our T3 account.
Could you please provide the Client ID and Client Secret required to communicate with your API (AEMP 2.0 / ISO 15143-3)?
Details:
Company: <Company Name>
Equipment Manager Contact: <Your Name, Email, Phone>
Sample Machine Serials: <List a few>
Intended Use: Read-only data ingestion into T3
Thank you!
<Your Name>
<Title>
<Email | Phone>
What to expect:
After receiving the credentials, go to T3 → Company → Integrations → Rokbak Haul Track, enter the values, and save to start the data sync.