Skip to main content
All CollectionsSmart Water Shutoff
How to use the Local Mode
How to use the Local Mode

General Questions

Christina avatar
Written by Christina
Updated over a week ago

To protect a home from water damage when access to Wi-Fi® is not available, Local Mode can be utilized.

Users can manually program leak detection sensitivity (default = high) and perform health tests with the installed unit. (Note: unit must be connected to AC power and installed on a pressurized pipe.)

Below are the detailed instructions on how you can set the local mode:

  • Open the valve:

    OPEN_SWS.png

  • Select the leak detection sensitivity:

    SET_SENSITIVITY_ON_SWS.png

  • Run a Health test:

    RUN_HEALTH_TEST_ON_SWS.png

  • LED Lights during standard operations:

Did this answer your question?