Wired Connection for GoPro | Glambot Help Center

Start with the GoPro unplugged from the USB-C
Swipe down on the touch display, then swipe left
Tap [Preferences]
Tap [Wireless Connections]
Set [Wireless Connections] to ON
Tap [Connect Device]
Tap [GoPro Quik App]
Install/Open the GoPro Quik App on the iPhone
Navigate to the [GoPro] Tab
Tap [Connect a GoPro]
Tap [Connect]
Tap [Pair] when prompted
Name your GoPro or leave as default
Tap [Skip] if prompted to update (*update as needed and not rushed for time)
Tap [I’ll do this later] when prompted for cloud upload
Tap [No thanks]
Tap [Let’s Go]
Close the GoPro Quik app
Plug the USB-C cable into the GoPro and iPhone/iPad (Ensuring all connection points are securely connected on the Glambot® as well)
The Screen on the GoPro should display [USB Connected]
Open Snappic and select your event
Scroll down and tap [Select Accessories] then select [Volume Buttons] and tap [Done]
Tap [Configure Camera] then [Search for GoPro Camera]
Confirm the connection shows [Wired] and select your GoPro camera
Tap [Start Photo Booth]
Configure Video and Slowmo settings, then tap [Start Booth]
Tap [Video] and then select the time edit that best matches your desired Glambot® path
On the Glambot motion control web app, navigate to the advanced settings tab and confirm the connection type is set to [USB]
You are now ready to begin wired recording with your Glambot® and GoPro

Start with the GoPro unplugged from the USB-C
Swipe down on the touch display, then swipe left
Tap [Pair Device]
If [Wireless Connections] is off, tap [Turn On] when prompted, then tap [Pair Device] again
Install/Open the GoPro Quik App on the iPhone
Navigate to the [GoPro] Tab
Tap [Connect a GoPro]
Tap [Connect]
Tap [Pair] when prompted
Name your GoPro or leave as default
Tap [Skip] if prompted to update (*update as needed and not rushed for time)
Tap [I’ll do this later] when prompted for cloud upload
Tap [No thanks]
Tap [Let’s Go]
Close the GoPro Quik app
Plug the USB-C cable into the GoPro and iPhone/iPad (Ensuring all connection points are securely connected on the Glambot® as well)
The Screen on the GoPro should display [USB Connected]
Open Snappic and select your event
Scroll down and tap [Select Accessories] then select [Volume Buttons] and tap [Done]
Tap [Configure Camera] then [Search for GoPro Camera]
Confirm the connection shows [Wired] and select your GoPro camera
Tap [Start Photo Booth]
Configure Video and Slowmo settings, then tap [Start Booth]
Tap [Video] and then select the time edit that best matches your desired Glambot® path
On the Glambot motion control web app, navigate to the advanced settings tab and confirm the connection type is set to [USB]
You are now ready to begin wired recording with your Glambot® and GoPro

If the GoPro is still not connecting properly or not showing up as wired after following these steps, see GoPro not found / No wired connection in Snappic