This report includes a built-in Risk Matrix that lets you assess identified hazards and the controls you're putting in place using two key factors:

This helps you evaluate hazards more accurately and show exactly how your control measures reduce that risk.

United Kingdom only:

If you have a Premium or Complete Plan, you can create and manage RAMS with Risk Matrix using both the App and the Hub.

or

If you are scanning into a Project, it will unlock RAMS with Risk Matrix for the following plans:

- Free

- Standard users

1. Open the HazardCo App and find "RAMS with Risk Matrix"

- You can find this on the Home screen

- OR tap "Create" at the bottom right, then select from the list

2. Choose to create a new or use a template (if one has already been saved)

3. Specify the:

- Site location

- Description of works

- Customer / Client name

- Site manager (optional)

4. Select the People at Risk

5. Select your hazards that are present

You can create custom hazards within each of hazard categories or at the bottom of the screen within the custom hazard category

6. Once hazards are selected, complete the risk assessment for each selected hazard. The assessment contains:

Confirm who might be affected by the selected hazard

Use the sliders to set the initial likelihood and consequence

Select any controls to be put in place for those hazards

Use the sliders to set the residual likelihood and consequence

7. Select any PPE required to carry out the work

8. Select (deselect) or create general procedures

9. Use the (+) icon to add or create a Sequence of work step

10. Write the description of the Sequence of work step

11. Review your RAMS with Risk Matrix before signing and saving it.

12. After signing, you can also save your RAMS with Risk Matrix as a new template if you wish to use the information entered again in the future, as well as add any additional signatures