Skip to main content

Farm Hash

Using the Farm Hash value you can quickly and easily add rigs to your farm in Hive OS.

Nazar avatar
Written by Nazar
Updated over 2 years ago

You can find FARM_HASH in the web interface of your farm in the "Settings" section. Using it you can easily add rigs in bulk without creating rigs on the web and getting RIG_ID. Hash is unique for each farm.

Write Hive image as usual to your Flash/SSD. After the write you’ll find HIVE disk in Windows. It holds Hive config files, there is rig-config-example.txt in there. Open it, edit and save as rig.conf.

HIVE_HOST_URL="https://api.hiveos.farm"# Find out your hash in farm's settings on the web
# The rig will autoregister itself in your account after the first run
FARM_HASH=your farm hash goes here# Password used for the rig
RIG_PASSWD=# If you know rig id before creation you can set it here leaving FARM_HASH blank
RIG_ID=# If you use FARM_HASH you can optionally name your rig otherwise the name will be autogenerated
WORKER_NAME=...........

Put your Farm Hash, copy the value from the web: FARM_HASH=f019745da6ba65630b28ef3c92608e7022b4bf76 No need to set RIG_ID or RIG_PASSWD.

That’s it, just to set the value in rig.conf. Now boot your rig and it will connect to web automatically.

FARM_HASH can be effectively used with Hive Flasher for bulk rig installations. More details here.

ASICs can be installed in bulk just by connecting via SSH and using FARM_HASH. More details here.

Did this answer your question?