Available software for ASICs from Hive
It's a lightweight application running on the stock (or custom firmware of your choice) ASIC firmware.
Allows you to see the miner in Hive, to control Wallets, Pools, restart and reboot the miner.
Supports a broad range of ASIC models: Antminer, Innosilicon, Zig and even some FPGA miners.
Supported ASICs:
Antminer:
A3
B3
D3, D3 (Blissz)
DR3
E3
L3+, L3++
S7
S9, S9i, S9j, S9k, S9SE, S9-Hydro, S9 (VNISH)
S10
S11
S15
S17, S17+, S17E, S17 Pro
S19, S19 Pro, S19j, S19j Pro, S19+, T19
T9, T9+
T15
T17, T17+, T17E
X3
Z9, Z9-Mini
Z11
Innosilicon:
A5/A8 (need test)
A9 ZMaster
D9 DecredMaster
S11 SiaMaster
T3 BTCMiner
T3H+, T3+, T2Th+, T2Thf+, T2Thl+, T2Th, T2Tz-30T, T2Thm, T2Thf, T2T+ (32T), T2Ts-26T, T2Ti-25T, T2T-24T
Todek:
Toddminer C1, C1 PRO
HashAltCoin:
Blackminer F1, F1+, F1-MINI
Blackminer F1-Ultra, F1-MINI+
Zig:
Z1, Z1+
Actual list can be always found on GitHub.
All the instructions on Hiveon OS Client installation can be found here.
It's a custom firmware that replaces the stock one. Supports only selected models: Antminer S17, S17+, S17E, S17 Pro, S9, S9i, S9j, S10, L3+, L3++, T9+, T17, T17+, T17E.
S17: up to 72 Th/s with air cooling
S17 Pro: up to 80.1 Th/s with standard PSU, up to 85 Th/s with liquid cooling
S9, S9i, S9j: up to 16.8 Th/s with standard PSU, up to 19.1 Th/s with the custom one
S10: up to 21.5 Th/s with standard PSU, up to 23.5 Th/s with the custom one
T9+: up to 13.6 Th/s with standard PSU
Hiveon Firmware for other ASIC models are coming soon, so stay tuned!
Hiveon ASIC Firmware features:
Speeding up of worn ASIC chips;
Manual and automatic selection of voltage and frequencies;
Individual fine-tuning of frequencies;
Chips stop consuming electricity if the Internet connection is lost;
Antivirus protection;
Recovery of devices that have previously been infected with viruses;
LEDs flash on an ASIC in case of fan or chip failure;
Built-in wattmeter;
Watchdogs for temperature and hashrate;
Hiveon OS is free when using Hiveon ASIC firmware!
All the instructions on firmware installation can be found here.
Hiveon OS Client and Hiveon ASIC Firmware comparison
Hiveon OS Client and Hiveon ASIC Firmware are not the same products.
Model / Feature | See miner in Hiveon OS | Control wallets & pools | Restart miner | Reboot miner | Anti-virus (Hiveon FW only) | Over clocking (Hiveon FW only) | Under volting (Hiveon FW only) | Voltage adjustment (Hiveon FW only) | Auto-tuning (Hiveon FW only) |
Antminer | |||||||||
A3 | * | * | * | * | |||||
B3 | * | * | * | * | |||||
D3, D3 (Blissz) | * | * | * | * | |||||
DR3 | * | * | * | * | |||||
E3 | * | * | * | * | |||||
L3+, L3++ | * | * | * | * | * | * | * | * | * |
S7 | * | * | * | * | |||||
S9, S9i, S9j | * | * | * | * | * | * | * | * | * |
S9k, S9SE, S9-Hydro | * | * | * | * | soon | soon | soon | soon | soon |
S10 | * | * | * | * | * | * | * | * | * |
S11 | * | * | * | * | |||||
S15 | * | * | * | * | |||||
S17, S17+, S17E, S17 Pro | * | * | * | * | * | * | * | * | * |
T9 | * | * | * | * | |||||
T9+ | * | * | * | * | * | * | * | * | * |
T15 | * | * | * | * | |||||
T17, T17+, T17E | * | * | * | * | * | * | * | * | * |
X3 | * | * | * | * | |||||
Z9, Z9-Mini | * | * | * | * | |||||
Z11 | * | * | * | * | |||||
Innosilicon | |||||||||
A5/A8 (need test) | * | * | * | * | |||||
A9 ZMaster | * | * | * | * | |||||
D9 DecredMaster | * | * | * | * | |||||
S11 SiaMaster | * | * | * | * | |||||
T3 BTCMiner | * | * | * | * | |||||
T3H+, T3+, T2Th+, T2Thf+, T2Thl+, T2Th, T2Tz-30T, T2Thm, T2Thf, T2T+ (32T), T2Ts-26T, T2Ti-25T, T2T-24T | * | * | * | * | |||||
Todek | |||||||||
Toddminer C1, C1 PRO | * | * | * | * | |||||
HashAltCoin | |||||||||
Blackminer F1, F1+, F1-MINI | * | * | * | * | |||||
Blackminer F1-Ultra, F1-MINI+ | * | * | * | * | |||||
Zig | |||||||||
Z1, Z1+ | * | * | * | * |
For any information you may need about ASICs, please check our forum, Github or our Knowledge Base.