Skip to main content

Testing your Smart SIM connection (iOS)

How to confirm your Smart SIM is connected

Written by Will

Once your Smart SIM is installed and configured, it's worth running a quick test to make sure everything is working correctly. This guide walks you through how to do that, both through the Honest app and via our connection test page.



​

Before you start

For each of the steps below, the quickest way to make changes is through Control Centre, swipe down from the top right of your screen to open it.
​

1. Turn off Wi-Fi

Open Control Centre and tap the Wi-Fi tile β€” it should turn grey when off.
​

Alternatively: Settings β†’ Wi-Fi β†’ toggle off
​

2. Turn off any VPNs

Skip this step if you don't use a VPN.
​

Open Control Centre and tap the VPN tile if it's showing.
​

Alternatively: Settings β†’ VPN β†’ toggle off
​



3. Switch mobile data to Smart SIM

Open Control Centre, long-press the Mobile Data tile, and select Honest Smart SIM.
​

Alternatively: Settings β†’ Mobile Service β†’ Mobile Data β†’ Select your Smart SIM
​


4. Run the connection test

Test in the Honest app

  1. Open the Honest app

  2. Tap your Smart SIM

  3. Tap Test connection

The app will run a quick check and show a success screen if your Smart SIM is connected and working correctly.

Test via the website
​

Visit smartsim.honestmobile.com on your iPhone while connected to your Smart SIM.

  • βœ… Green tick β€” Smart SIM online. You're all set.
    ​

  • ❌ Red cross β€” Smart SIM is not currently connected. Make sure Wi-Fi and your VPN are off, then reload the page.



​Need to go back to basics? See the full setup guide

Did this answer your question?