The Hybird Edge Controller is the gateway between the smart breakers and the Hybird OS platform. There is one controller model (BASE-LTE-LAN). An outdoor-rated enclosure variant is available (BASE-LTE-LAN-O) for an additional 35 DKK.

Parameter Value Product code BASE-LTE-LAN (standard) / BASE-LTE-LAN-O (outdoor enclosure) Power input 24V DC (via PSU) RS485 communication 500 Kbps, Modbus RTU protocol Recommended max breakers 80 per controller (hard protocol limit: 247) Internet connectivity Ethernet, Wi-Fi, LTE (SIM supplied by Hybird) Connectivity fallback Ethernet first, then Wi-Fi, then LTE LTE data cost passed through to the customer at cost (typically approximately 40 DKK/month), billed separately Data usage Under 800 MB per controller per month (subject to number of breakers) Mounting DIN rail (35mm, EN 60715) Dimensions 88 x 68 x 55 mm Weight 190 g Operating temperature Up to 45°C

For outdoor installations or harsh environments (including exposure to snow, rain, and heat), the BASE-LTE-LAN-O variant includes an outdoor-rated enclosure. The additional cost is 35 DKK over the standard controller price.

The controller supports Ethernet (recommended) and Wi-Fi for internet connectivity. It uses DHCP by default for IP address assignment. Static IP configuration is available on request - contact Hybird support.

All connections are outbound. No inbound ports or port forwarding are required. Typical data usage is under 800 MB per controller per month.

The controller ships with two external screw-on antennas: a Wi-Fi antenna (cone shaped, female, fits the left port) and a GSM antenna (straight cylinder with two indents at the tip, male, fits the right port). The two are not interchangeable. See the Hybird Edge Controller installation guide for fitting and orientation.

The controller communicates with breakers over an RS485 serial bus using the Modbus protocol at 500 Kbps. Breakers are connected in a daisy-chain topology. Pre-cut RS485 wire (rated 110°C, 600V) is included with each breaker package for inter-breaker connections.

Parameter Value Product code PSU (EAN: 5744007953413) Input 230V AC Output 24V DC Mounting DIN rail Dimensions 90 x 32 x 54 mm Weight 135 g

Parameter Value Product code UPS (EAN: 5744007953420) Battery 3.7V, 20 Ah lithium-polymer Connection Via supplied IDC cable to controller Mounting DIN rail Dimensions 90 x 32 x 54 mm Weight 130 g Function Maintains controller operation during mains power loss

The UPS is optional. It allows the controller to remain online during power outages, reporting status to Hybird OS and logging data until the battery is depleted. The controller can run for approximately 3 hours supplied only by the UPS battery. For runtime estimates specific to your installation, contact Hybird support.

Controller: the controller has a green power LED on its body. Green illuminated = controller has power. It remains on during the reboot sequence.

Breakers (for reference · the breaker LED always blinks, never solid; the pattern reflects both the mode selected by the green dip switch and the on/off state):

LED pattern State Blinking red Work mode · breaker ON Blinking blue Work mode · breaker OFF Blinking blue/purple Setup mode · breaker ON Blinking purple/red Setup mode · breaker OFF

Need help?

Technical support: support@hybird.energy
​Billing and invoicing: billing@hybird.energy
​Sales and partnerships: sales@hybird.energy
​Phone: +45 3020 4900

Privacy Policy