What it is
Remote monitoring shows the live electrical state of your installation from anywhere, with no site visit. Every panel reports voltage, current, power and load continuously, down to the individual breaker.
Why it matters
See a fault or imbalance the moment it appears, not at the next inspection.
Check any site from your phone or laptop.
Diagnose before you drive out, so most issues are resolved remotely.
How to view it
Log in to Hybird OS at your account URL.
Open the site, then the controller you want to inspect.
Select a breaker group to see live voltage, current and power for each phase.
Good to know
Readings refresh every few seconds, and historical trends are kept for every value so you can compare against earlier periods.