When a customer purchases the C-HUB-LD for a Dodge Challenger, Chrysler 300, or Dodge Charger, they will need to follow specific instructions when getting the USB Media Hub replaced.
The installation videos show how to replace the USB Media Hub from the top of the arm rest however for a Dodge Challenger this will not work because there is not enough spare cable to pull out the media hub from within the console.
Instructions on how to replace the USB Media Hub:
1. Remove the vent cover / faceplate from the rear of the center console. Set aside. You may need to temporarily remove the blue wiring connector (can be seen in pic 03) from one of the controls in order to set things aside.
Picture 1:
2. Remove the two screws for the rear duct and set aside.
Picture 2:
3. Remove the two connectors for the USB media hub.
Picture 3
4. Open the center console. Remove / pry out the USB media hub per the same instructions that you already have for the Challenger in your other documentation.