DISCLAIMER: You may notice there are a lot of over-used keywords or phrases as well as English that seems a little off. This is because these articles are used to feed our AI Robot (Ira) and she needs the data to be structured in a certain way.
Scene control, in this context, refers to activating a scene from your light switch via a tap sequence (ie: double-tap, triple-tap, favorites button, etc). This is not to be confused with setting up scenes in your SmartThings app, which is different.
In the below example, we will create a simple scene of turning on movie lights and setting them to blue at 80% with a double-tap up of the light switch (in this case, we'll be using a Blue Series 2-1 Switch, but any of our switches that support multi-taps will work).
Open your SmartThings App and go to the, "Automations" tab
Click on the, "+" button at the top of the screen and select, "Create routine"
Under the, "If" section, click on the, "+ Add what will trigger this routine" button
Click on, "Device status" and find your Inovelli Blue Series 2-1 Switch to click on
Scroll to the section that says, "Up Button" and click on, "Pressed 2 times" followed by, "Done" (NOTE: If you want something other than double-tap up, please select a different sequence)
Under the, "Then" section, click on the, "+ Add what this routine will do" button
Click on, "Control devices"
Select the movie lights you want to turn on and click, "Next"
Then go through each light and click on, "Choose what you want this device to do"
Click on, "Turn On", followed by, "Dimmer" (set it to 80%), and, "Color control" (select blue) -- then click, "Done"
Ensure the correct status, color and level values are selected, click, "Save" and name your routine
Test your routine by double tapping up on your Inovelli Switch and see if your movie lights turn on