Skip to main content

Indabox Pro-S connection

Updated over a month ago

This article aims to guide you through the installation process of your Indabox Pro-S.

Connecting the Indabox

Device Details

The Indabox consists of three parts, housed within a single enclosure:

  • Indus Part: Retrieves data from the equipment.

  • Cloud Part: Sends this data to a storage platform.

  • Electronic Module: A hardware diode security component ensuring one-way data communication from the Indus Part to the Cloud Part.

Connections are organized by color codes:

  • Red background: Indus part connections.

  • Grey background: Cloud part connections.

Indabox Pro-S Connector Diagram :

WARNING ! Before proceeding with the connection, please note that the Indabox Pro-S must be installed with a minimum clearance of 5cm from surrounding equipment.

Connecting the Indabox to the Industrial Network (OT)

To integrate the Indabox into your local industrial network:

  1. Plug an RJ45 cable into the local network port.

  2. Connect the other end of the RJ45 cable to Ethernet port (2) on the Indabox (refer to the diagram below).

Connecting the Indabox to the IT Network

To allow the Indabox to communicate with the IT network:

  1. Plug an RJ45 cable into the IT network.

  2. Connect the other end of the RJ45 cable to Ethernet port (5) on the Indabox (refer to the diagram below).

Connecting the Indabox to the Power Supply

To connect the power supply to your Indabox, proceed as follows :

Step 1 : Locate the Connector

The connector is located on one of the sides of your Indabox (refer to the image below).

Step 2 : Prepare the Power Supply

Choose a power supply unit capable of providing a DC voltage between 12V and 24V.

Step 3 : Make the Connections

  1. Connect terminal 1 of the connector to the negative (-) pole of your power supply.

  2. Connect terminal 3 of the connector to the positive (+) pole of the power supply

Your Indabox Pro-S connections are now complete.

Did this answer your question?