Prerequisites : This feature is reserved for users with an administrator role.

To access the date and time configuration of the INDUS Box, click on the Configuration menu, then on Date and time settings :

You will be taken to the configuration page.

If the INDUS Box has already been configured, the form will be pre-filled with the existing data.

A section at the top of the page provides information about the date configuration and indicates if an NTP server is present and synchronized.

Note : It is also possible to see the configured date and time on the INDUS Box at any time at the bottom of the page :

If an NTP server is available, check the "NTP Server" box :

Enter the address of the NTP server and click "Add":

The address of the selected server will appear :

Click "Send" to confirm the operation.

If you are not using an NTP server or if no NTP server is accessible, uncheck the "NTP Server" box, then click the "Get browser date and time" button which will initialize the date, time, and timezone.

Once the entered values are saved, click "Send".