All Collections
Setup Guides
Manual Router Configurations
How to configure LimeVPN using L2TP for Draytek router?
How to configure LimeVPN using L2TP for Draytek router?
Steve M avatar
Written by Steve M
Updated over a week ago
  1. Choose VPN and Remote Access from the menu in the left.

  2. Select LAN to LAN in the submenu.

  3. Click on any empty entry to create a new connection.

  4. From the Common Settings, enter a profile name (e.g. LimeVPN ), then select Enable this profile.

  5. Choose Dial-Out as Call Direction, and check Always on.

  6. Choose L2TP with IPSec in Dial-Out Settings.

  7. Enter the IP address of the server you wishes to connect to. You can get the list of servers from here.

  8. Enter private in the Pre-shared key depending on the server you 

  9. Enter your LimeVPN Username& Password.

  10. When scrolling down to the TCP/IP settings please disable RIP Direction.

  11. Set NAT in "From the first subnet to the remote network, you have to do".

  12. Select Change default route to this VPN.

Did this answer your question?