This is a guide that shows how to install Monta on your charge point. If you want to connect your charge point to your Monta account, please follow the steps in the end of the guide.

Please note that when you connect your charge point to Monta, we become the operator of the charge point. This means that you need to use Monta to control the charging process.

Overview

  1. Connect to your charger point's wifi network

  2. Open your browser to 192.168.4.1

  3. Open the "Network" settings

  4. Fill in your WiFi network's details

  5. Under "Settings", click on "Communications"

  6. Connecting the charge point to your Monta account

1. Connect to your charger's wifi network

You need to first connect the device you are going to perform the installation on (phone, tablet, computer, etc.), to the wifi network, named after your charge point.

Connect to Wi-Fi network VIARIS UNI, ORB-EVVC3nnnnnnnnnnnn

The "nnnnnnnnnnnn" stands for the serial number of the charge point.

The factory-established password for the VIARIS UNI Wi-Fi network is 12345678.

2. Open your browser to 192.168.4.1

Once connected to the Wi-Fi network, open a web browser and write 192.168.4.1, connecting to the charger control web. From there, you can see the charge point's status, consumption, date and time, as well as manually control its start or completion of charging.

3. Open the "Network" settings

Now it is time to connect your charge point to your wifi network. To do so, please open the settings on the left and click on Network.

4. Fill in your WiFi network's details

Once you open the Network tab, go to the "Connectivity" section of the page. There you need to insert your wifi's details. Please note that the following screenshot includes an example of a wifi name.

SSID: Your wifi's name

Password: Your wifi's password

To save these settings, click on "Overwrite".

5. Under "Settings", click on "Communications"

  • Under "Settings", find the "Communications" tab and open it.

  • In the URL field you need to insert our server address, followed by your charge point's serial number. Both the URL and the serial number are case sensitive. Please note that every serial number looks different and this is just an example. As shown in the example below, please fill in: ws://ocpp.monta.app/EVVC3nnnnnnnnnnnn

  • The stated URL is written with small letters and the serial number is written with capital ones.

  • In the "Port" field on this page, you will see the number 430. Please delete that number and insert the number 80, instead, as shown in the example.

  • To save the settings, click on "Overwrite".

5. Connecting the charge point to your Monta account

Now you need to add and connect your charge point to your Monta account.

You can do this through either the Monta app or Monta Portal.

Here is a guide for the Monta app.

Here is guide for Monta Portal.

Did this answer your question?