This is a guide that shows how to install Monta on your charge point. If you want to connect your charge point to your Monta account, please follow the steps in the end of the guide.

Please note that when you connect your charge point to Monta, we become the operator of the charge point. This means that you need to use Monta to control the charging process.

Overview

  1. Prerequisites

  2. Find and connect your charge point via Bluetooth

  3. Enter security code

  4. Adjust the charge point's access control

  5. Enter security code

  6. Click on "Charger Manager Platform"

  7. Select "Different Backend URL"

  8. Enter the Monta server URL and save

  9. Reboot the charge point

  10. Connecting the charge point to your Monta account

1. Prerequisites

In order to connect your charge point with Monta, you will need to first install EVBox mobile app:

Android App / iOS App

2. Find and connect your charger via Bluetooth

Note: Save the charge point's serial number at this point. You will use it later in the pairing process. It should look something like EVB-XXXXXXXXX.

3. Enter security code

Enter the security code of your charge point in order to get EVBox APP authorized with your charge point. Security Code should come with your charge point's installation packaging, typically located on a big cardboard cutout. Enter the code and press "Authorize".

4. Adjust the charge point's access control

IMPORTANT! If you are planning to share your charge point publicly and EV drivers will pay for their charges via Charge Keys, you need to enable this. Here, in the setting "Charger Access Control", enable Activate using charge fob/key and disable Auto-start. You can watch a more detailed guide about it here.

Once connected to the charge point you will need to head into "Installer Mode". Click the button at the bottom of the screen.

5. Enter security code

Once you arrive to this screen, you will be prompted to enter the security code. This is the same security code that you was required to enter on step 3. Enter the code and click on "Continue".

6. Click on "Charging Manager Platform"

After entering Installer mode you will see the menu area where you need to enter so called "Charging Manager Platform" go ahead and click on that button.

7. Select "Different Backend URL"

Upon entering the "Charging Manager Platform" section you will be presented with a list of options. Select the first option "Different Backend URL".

8. Enter the Monta server URL and save

In the "Different Backend URL" you will be able to enter the Monta server URL: ws://ocpp.monta.app/

Once complete, click on "Save" and then "Select".

9. Reboot the charge point

Click on "Reboot the charging station".

Once these steps are done and your charge point is restarted go ahead and continue the rest of the setup in the Monta app or Monta Portal.

If you are connecting multiple EVBox Hub and Satellite charge points - contact Monta support.

10. Connecting the charge point to your Monta account

Now you need to add and connect your charge point to your Monta account.

You can do this through either the Monta app or Monta Portal.

Here is a guide for the Monta app.

Here is guide for Monta Portal.

Did this answer your question?