Overview

Section A: Hardware setup

  1. Connect to your charger's wifi network “VIARIS UNI, ORB-EVVC3nnnnnnnnnnnn”

  2. Open your browser to 192.168.4.1

  3. Connect your charge point to your wifi network

  4. Under "Settings", click on "Communications"

Section B: Setting up in the Monta Portal

  1. Add Charge Point

  2. Add Charge Point Settings

  3. Add Charge Point Details

  4. Connect to Monta

  5. Select Brand

  6. Select Model

  7. Select Integration Method

  8. OCPP Integration

  9. Check Connection

  10. Verifying

  11. Perfecto! You are now connected to Monta!

Section A: Hardware setup

You first need to integrate your charger with Monta. This will make us the operator of your charge point. This means we will have control of your charge point and from now on you should use us to start or schedule a charge on your car.

1. Connect to your charger's wifi network “VIARIS UNI, ORB-EVVC3nnnnnnnnnnnn”

You need to first connect the device you are going to perform the integration on (phone, tablet, computer, etc.), to the wifi network, named after your charger.

Connect to Wi-Fi network VIARIS UNI, ORB-EVVC3nnnnnnnnnnnn (where nnnnnnnnnnnn is the serial number of the VIARIS).

The factory-established password for the VIARIS UNI Wi-Fi network is 12345678.

2. Open your browser to 192.168.4.1

Once connected to the Wi-Fi network, open a web browser and write 192.168.4.1 thus connecting to the charger control web. From there, you can see the charge point's status, consumption, date and time, as well as manually control its start or completion of load.

3. Connect your charge point to your wifi network

3.a. Open the Network settings

Now it is time to connect your charge point to your wifi network. To do so, please open the settings on the left and click on Network.

3.b Fill in your wifi networks details

Once you open the Network tab, go to the Connectivity section of the page. There you need to insert your wifi's details. Please note that the following screenshot includes an example of a wifi name.

SSID: Your wifi's name

Password: Your wifi's password

To save these settings, click on Overwrite.

4. Under "Settings", click on "Communications"

  • In the URL field you need to insert our server address, followed by your charge point's serial number. Both the URL and the serial number are case sensitive. Please note that every serial number looks different and this is just an example. As shown in the example below, please fill in: ws://ocpp.monta.app/EVVC3nnnnnnnnnnnn

  • The stated URL is written with small letters and the serial number is written with capital ones.

  • In the "Port" field on this page, you will see the number 430. Please delete that number and insert the number 80, instead, as shown in the example.

  • To save the settings, click on Overwrite.

Section B: Setting up on the Monta Portal

Before setting up on the Monta Portal create the team. Here you can find information about how to create the team on Monta Portal and where to add your charge point.

1. Add Charge Point

On Monta Portal click on "Add charge point" under Teams section.

2. Add Charge Point Settings

Select Orbis and the charge point model, put max charging power (this information can be find on the charge point box or should have been provided by the manufacturer in this case Orbis) and select supported connector type.

3. Add Charge Point Details

You can add an existing Charge point group or create one for that specific location. If you already have a Charge point group pointing to the location of the charge point it will be added automatically.

4. Connect to Monta

Important! If you choose "Not now" you can connect your charge point to Monta later. Click on Charge Point Name - Set Integration.

5. Select Brand

6. Select Model

7. Select Integration Method

8. OCPP Integration

Important!! At this point of installation you will need to have the charge point serial number. Add Charge Point identifier and click on "Done, what's next?"

9. Check Connection

10. Verifying

Here we verify your connection to Monta. Please wait until the loading bar reaches 100%.

11. Perfecto! You are now connected to Monta!

Congrats! 🤗 You have now successfully installed your Orbis charge point to Monta.

Did this answer your question?