Overview

  1. Add Charge Point

  2. Add Charge Point Settings

  3. Add Charge Point Details

  4. Connect to Monta

  5. Select Brand

  6. Select Model

  7. Select Integration Method

  8. OCPP Integration

  9. Check Connection

  10. Verifying

  11. Perfecto! You are now connected to Monta!

Before setting up in the Monta Portal create the team. Here you can find information about how to create the team on Monta Portal and where to add your charge point.

1. Add Charge Point

On Monta Portal click on "Add charge point" under Teams section.

2. Add Charge Point Settings

Select Garo and the charge point model, put max charging power (this information can be find on the charge point box or should have been provided by the manufacturer in this case Garo) and select supported connector type.

3. Add Charge Point Details

You can add an existing Charge point group or create one for that specific location. If you already have a Charge point group pointing to the location of the charge point it will be added automatically.

4. Connect to Monta

Important! If you choose "Not now" you can connect your charge point to Monta later. Click on Charge Point Name - Set Integration.

5. Select Brand

6. Select Model

7. Select Integration Method

8. OCPP Integration

Important!! At this point of installation you will need to have the charge point serial number. Add Charge Point identifier and click on "Done, what's next?"

9. Check Connection

10. Verifying

Here we verify your connection to Monta. Please wait until the loading bar reaches 100%.

11. Perfecto! You are now connected to Monta!

Congrats! 🤗 You have now successfully installed your charge point to Monta.

Did this answer your question?