KEBA Installation Guide Monta Web Portal
Updated over a week ago
Overview
Section B: Setting up in the Monta Portal
Section A: Hardware setup
1. Prerequisites
Before you begin the integration of your charge point there is information you need to retrieve from the configuration label. The configuration label is in a pouch attached to the installation materials. On the label you will find the following information:
Default SSID: This is a series of numbers, which is the wifi name that your charge point creates
Default Hotspot password: This is the password for the wifi that your charge point has created
WebUI default username & WebUI default password: These are the credentials that you need for logging in for the first time to setup the charge point
2. Login to the Web User Interface
The first thing you need to do is to connect your device to the WiFi that your charge point is emitting. To do so, find the WiFi created by your charge point (Default SSID) and insert the password (Default Hotspot password).
There will be an IP address called WLAN Hotspot IP address. On your device, open up a browser and type in the IP address.
3. Enter the login credentials
Here, you need to use the WebUI default username & WebUI default password that you have retrieved from the configuration label of the charge point.
4. Hover over "Configuration" and select "Network connection"
5. Adjust the Network Configuration settings
Once you enter the Network Configuration of the charge point you need to adjust the settings.
Switch the WLAN/WiFi toggle to "ON"
After that you need to press the refresh button next to the "Available Networks" field
The next step is to put in your own WiFi's details:
WLAN/WiFi SSID: Select your wifi name from the drop down menu
WLAN/WiFi Password: *Your wifi's password*
6. Hover over the configuration button again and select "OCPP"
7. Adjust the OCPP Settings
Here are the details that you need to enter:
OCPP Communication type: 1.6 JSON
Central System Hostname: ocpp.monta.app
Centra System Port: 443
Secure Central System Connection: ON
Write down the Charge point Identity, as it will be needed in the 7th step of the Monta app setup.
8. Save and check
Save the made changes and check whether the charger is connected to OCPP server in the status section.
If your charger is connected to the OCPP server you can continue the integration in the Monta app.
Section B: Setting up on the Monta Portal
Before setting up in the Monta Portal create the team. Here you can find information about how to create the team on Monta Portal and where to add your charge point.
1. Add Charge Point
On Monta Portal click on "Add charge point" under Teams section.
2. Add Charge Point Settings
Select KEBA and the charge point model, put max charging power (this information can be find on the charge point box or should have been provided by the manufacturer in this case KEBA) and select supported connector type.
3. Add Charge Point Details
You can add an existing Charge point group or create one for that specific location. If you already have a Charge point group pointing to the location of the charge point it will be added automatically.
4. Connect to Monta
Important! If you choose "Not now" you can connect your charge point to Monta later. Click on Charge Point Name - Set Integration.
5. Select Brand
6. Select Model
7. Select Integration Method
8. OCPP Integration
Important!! At this point of installation you will need to have the charge point serial number. Add Charge Point identifier and click on "Done, what's next?"
9. Check Connection
10. Verifying
Here we verify your connection to Monta. Please wait until the loading bar reaches 100%.
11. Perfecto! You are now connected to Monta!
Congrats! 🤗 You have now successfully installed your charge point to Monta.