1. Add Charge Point
On Monta Portal click on "Add charge point" under Teams section.
2. Add Charge Point Settings
Select Sicon and the charge point model, put max charging power (this information can be find on the charge point box or should have been provided by the manufacturer in this case Sicon) and select supported connector type.
3. Add Charge Point Details
You can add an existing Charge point group or create one for that specific location. If you already have a Charge point group pointing to the location of the charge point it will be added automatically.
4. Connect to Monta
Important! If you choose "Not now" you can connect your charge point to Monta later. Click on Charge Point Name - Set Integration.
5. Select Brand
6. Select Model
7. Select Integration Method
8. OCPP Integration
Important!! At this point of installation you will need to have the charge point serial number. Add Charge Point identifier and click on "Done, what's next?"
9. Check Connection
Here we verify your connection to Monta. Please wait until the loading bar reaches 100%.
11. Perfecto! You are now connected to Monta!
Congrats! 🤗 You have now successfully installed your charge point to Monta.