Some charge points require you to install Monta on the charge point before you can connect it to your Monta account. We recommend to check out this section of guides, where you can find your charge point brand and follow the installation steps first.

Before setting up on the Monta Portal create the team. Here you can find information about how to create the team on Monta Portal and where to add your charge point.

Overview

  1. Go to "Charge points" and click on "Add charge point"

  2. Select team

  3. Select brand and model

  4. Add charge point details

  5. Select accessibility settings

  6. Click on "Connect to Monta"

  7. Select Brand

  8. Select Model

  9. Continue with Cloud method

  10. Continue with OCPP method

  11. Insert serial number

  12. Check connection

  13. Verifying

  14. Perfecto! You are now connected to Monta!

1. Go to "Charge points" and click on "Add charge point"

Navigate to the "Charge points" section on the left side menu and click on "Add charge point".

2. Select team

You first need to select in which team you want to connect the charge point.

3. Select brand and model

Here, you need to select the brand and model of the charge point.

Then input the "Max charging power" (this information can be find on the charge point box or should have been provided by the manufacturer).

Select the supported connector type.

4. Add charge point details

Put in the name, location and the charge point group of the charger.

5. Select accessibility settings

Select accessibility

If you select "Private", the charge point will not be visible on the map for users that are not part of the charge point team. "Public" charge points are visible for all Monta users.

Set charge point active

Here, you can select whether or not to set the charge point as active. If you select "Yes", you will be able to use all functionalities of the charge point.

6. Click on "Connect to Monta"

Important! If you choose "Not now" you can connect your charge point to Monta later. Click on Charge Point Name - Set Integration.

7. Select Brand

Here, you need to select the charge point brand. In this example, we have used the brand ABB, but you can find your charge point brand from the list.

8. Select Model

9. Continue with Cloud method

Charge points, such as Easee, Wallbox or Zaptec, for example, require you to log in with your charge point login credentials at this stage. This is the same login you have for your charge point's app/cloud.

Please note we have used Easee cloud login just as an example. If you see a similar login page, please enter your respective charge point login credentials. You will see the following screens:

a. Select cloud option

b. Login to the cloud

c. Select your charger

d. Click on "Yes, pair charge point"

If you have used this connection method, continue to step 13.

10. Continue with OCPP method

11. Insert serial number

Important! At this point of installation you will need to have the charge point serial number. Add charge point serial number and click on "Done, what's next?".

12. Check Connection

13. Verifying

Here we verify your connection to Monta. Please wait until the loading bar reaches 100%.

14. Perfecto! You are now connected to Monta!

Congrats! 🤗 You have now successfully connected your charge point to Monta!

Did this answer your question?