This is a guide that shows how to install Monta on your charge point. If you want to connect your charge point to your Monta account, please follow the steps in the end of the guide.

Please note that when you connect your charge point to Monta, we become the operator of the charge point. This means that you need to use Monta to control the charging process.

Overview

  1. Connect your device to your charge point

  2. Open a browser to 10.10.10.1

  3. Login to the page

  4. Edit the CSMS settings

  5. Connect the charge point to the internet

  6. Enter the "Admin" tab

  7. Connecting the charge point to your Monta account

1. Connect your device to your charge point

Using your mobile device or laptop, search for the charge point’s hotspot. It would follow this format: EO-#######

The password to this hotspot will be the numeric portion of the hotspot name.

2. Open a browser to 10.10.10.1

Now when connected to the hotspot, open a browser and enter 10.10.10.1 and hit "Enter".

3. Login to the page

Login to the page with these credentials. Please note that the password is the Hostname, which is visible on the login page below.

Login: Installer

Password: numeric portion of the Hostname

4. Edit the CSMS settings

Navigate to the "CSMS" tab on the left side menu.

Change these parameters:

CSMS Server Address: wss://ocpp.monta.app:443

Charger Identity: leave it as default, otherwise use serial number of the charge point

Offline Authorization is disabled.

Default id Tag mode is disabled.

Default ID Tag: 8 capital F’s - "FFFFFFFF"

RFID is enabled.

Click on "Save".

5. Connect the charge point to the internet

Navigate to the "Network" tab on the left side menu.

In this example, we are connecting the charge point to the internet via WiFi.

Enable WiFi, using the toggle. Here you can either manually enter your WiFi credentials or scan for an available network.

Manually enter credentials

WiFi SSID: *your WiFi name*

WiFi PSK: *your WiFi password*

Scan for an available network

Click on the "Refresh List" button, located in the upper right corner of the screen.

Your WiFi network should appear. Select it and click on "Use as WiFi SSID".

Enter your WiFi password manually.

Click on "Save".

6. Enter the "Admin" tab

Navigate to the "Admin" tab on the left side menu.

Click on "Restart" under the SCC client. Afterwards restart the EVSE.

Once the charge point has rebooted, you can continue to connect the charge point to Monta.

Please prepare the serial number of the charge point, as you will need it in the next steps.

7. Connecting the charge point to your Monta account

Now you need to add and connect your charge point to your Monta account.

You can do this through either the Monta app or Monta Portal.

Here is a guide for the Monta app.

Here is guide for Monta Portal.

Did this answer your question?