This is a guide that shows how to install Monta on your charge point. If you want to connect your charge point to your Monta account, please follow the steps in the end of the guide.

Please note that when you connect your charge point to Monta, we become the operator of the charge point. This means that you need to use Monta to control the charging process.

Overview

  1. Power up the charge point and connect to it

  2. Open a browser to 192.168.250.1

  3. Connect the charge point to WiFi

  4. Open your Charge Amps space profile

  5. Enable RFID lock

  6. Login to 192.168.250.1 again

  7. Connecting the charge point to your Monta account

1. Power up the charge point and connect to it

Turn on the charge point.

Using a smartphone or a computer, open the wireless settings of the device and scan for networks.

Find and select the network called HALO_******

When asked, enter the "Network key"

This can be found in the configuration manual.

2. Open a browser to 192.168.250.1

Once you are connected, open a browser window on the same device, enter 192.168.250.1 and hit "Enter".

Now the setup page should load. In the admin login page enter the pin code.

The "Pin-code" is same as the "Network key" previously used.

3. Connect the charge point to WiFi

In the setup page, navigate to the "Wi-Fi" section.

Network name (SSID): *your WiFi name*

Password: *your WiFi password*

Click on "Update".

4. Open your Charge Amps space profile

Once the charge point is online, open your Charge Amps space profile on your screen.

On your device type my.charge.space and login to your account.

Here you need to add your charge point to your Charge Amps space, if you have not already done this.

5. Enable RFID lock

In the Charge Amps space, navigate to the "Remote Control" section of the menu.

Turn on the "RFID Lock" toggle and make sure that the change is saved.

6. Login to 192.168.250.1 again

Now go back to the setup page at 192.168.250.1 and login again.

In here, go to "OCPP" settings.

Enter the OCPP endpoint: wss://ocpp.monta.app


Save the settings and reboot the charge point.

7. Connecting the charge point to your Monta account

Now you need to add and connect your charge point to your Monta account.

You can do this through either the Monta app or Monta Portal.

Please note that if your connecting your Charge Amps charge point via OCPP, you need to select the "OCPP" option in the app or Portal.

Here is a guide for the Monta app.

Here is guide for Monta Portal.

Did this answer your question?