Powered by Monta makes the installation process much faster and smoother. Follow this quick guide to learn how to add and connect your LinkCharging charge point to the Monta system.

Download the LINCHR app on your phone from here.

Turn on the Bluetooth on your phone and open the app.

To select your charge point, click in the search icon in the top right corner.

Once you do this, the available change points will appear.

Click on the connect button to select it.

Click on the charge point name again and it will open the operations interface.

Here, you need to create a password.

Enter it and click on "Confirm".

In the operations interface, click the settings button on top right corner.

After this, click on "Networking mode" to set up an internet connection.

Select the method you would like to use and enter the required information. For WiFi connection, you have to enter SSID (WiFi name) and your WiFi Password.

Click on "Confirm".

Find the QR sticker, located on the charge point.

Point the camera of your phone at the Monta QR sticker and scan it.

When you scan the QR code on the charge point, you will be prompted to open the Monta app. If you do not have the app yet, you will see how to download it.

Click on the "Open" button.

After scanning the QR code on the charge point, the Monta system has already recognized the charge point brand and model.

Enter the name and location of your charge point and select which team you want to register it in. Then click on "Connect to Monta".

Here, our system is checking if your charge point is online and is trying to connect to it.

You have successfully connected your charge point with Monta.