This is a guide that shows how to install Monta on your charge point. If you want to connect your charge point to your Monta account, please follow the steps in the end of the guide.

Please note that when you connect your charge point to Monta, we become the operator of the charge point. This means that you need to use Monta to control the charging process.

Important note: Static and Dynamic load balancing methods are available on EN+ charge points, True Dynamic is currently not supported.

Overview

  1. Connect to charge point's Hot-Spot

  2. Access the Web Configuration at 192.168.4.1

  3. Change the network configuration

  4. Scan the QR sticker

  5. Fill in the charge point details

  6. Wait to connect

  7. Congrats, you have connected your charge point to Monta!

1. Connect to charge point's Hot-Spot

Turn on or reboot the charge point and make sure the light indicator is flashing green.

Open mobile device's or computer's Wi-Fi settings and find a Hot-Spot with the name of your charge point's serial number as follows "SN100..."


Enter the password "admin123" and click connect.

2. Access the Web Configuration at 192.168.4.1

Now open a browser with the same device and enter this IP address 192.168.4.1 and open it.

To login, enter the 4-digit network pin. The network pin can be found on the cover of the charge point.

3. Change the network configuration

After logging in the web configuration click on "Charge Point Setup".

In the "Charge point Setup" menu, select WiFi as the internet connection method and below click on the drop-down menu and find the WiFi that you want to connect to.


Enter the WiFi password in the third field and click "Confirm".


Now the charge point will reboot automatically and will connect to Monta servers.

4. Scan the QR sticker

Find the QR sticker, located on the charge point.

Point the camera of your phone at the Monta QR sticker and scan it.

When you scan the QR code on the charge point, you will be prompted to open the Monta app. If you do not have the app yet, you will see how to download it.

Click on the "Open" button.

5. Fill in the charge point details

After scanning the QR code on the charge point, the Monta system has already recognized the charge point brand and model.

Enter the name and location of your charge point and select which team you want to register it in. Then click on "Connect to Monta".

6. Wait to connect

Here, our system is checking if your charge point is online and is trying to connect to it.

7. Congrats, you have connected your charge point to Monta!

Did this answer your question?