All Collections
Sounds: Guitar Profiles
Nigel Hendroff
Getting Started with Golden Tone by Nigel Hendroff
Getting Started with Golden Tone by Nigel Hendroff

Getting Started with Golden Tone by Nigel Hendroff

Jesse Schaefer avatar
Written by Jesse Schaefer
Updated over a week ago

"These were the type of amps I used early on in my playing career, which helped shape my whole approach to tone and my playing style. It was like putting on an old comfortable pair of slippers." - Nigel Hendroff

The Golden Tone bundle for Kemper was created by profiling a Gibson Goldtone GA-15RV. This rare single channel amp has 2 EL84 tubes, as well as well as 2 12AX7s in the preamp section. Exactly like the amp, these profiles are touch sensitive, harmonically rich, and can carry a wide range of input before saturation.


Installing via Rig Manager

  • Download Rig Manager at https://www.kemper-amps.com/downloads and install

  • Open the folder containing the Profiles you purchased from Multitracks.com and drag them into the Rig Manager App. They will show up in the local files tab in the app.

  • Connect your Kemper Profiler via USB cable to your computer and drag all the new Profiles to your Kemper. This can be done by dragging from the Local Files tab to the My Profiler tab.

  • Enjoy your new amp Profiles!

Installing via USB Thumb Drive

  • Take the USB that's been formatted for firmware updates and plug it into your PC/MAC.

  • Open folder named Shared and copy all the Profiles you purchased from Multitracks.com to this folder

  • Plug the USB in. Kemper should see the USB pretty quickly.

  • Inside the Kemper OS, push the external storage button.

  • Select Import.

  • Enjoy your new amp Profiles!

Did this answer your question?