All Collections
Sounds: Guitar Profiles
Peter Burton
Getting Started with The Gentleman by Peter Burton
Getting Started with The Gentleman by Peter Burton

Getting Started with The Gentleman by Peter Burton

Jesse Schaefer avatar
Written by Jesse Schaefer
Updated over a week ago

The Gentleman by Peter Burton is a Kemper bundle based on the Top Hat Supreme Sixteen. Peter has taken this boutique AC15/AC30 style amp from clean to 11 and even baked-in a few of his favorite overdrive pedals.

All profiles include a basic effects setup mapped to the KPA Remote. Either a compressor or boost for effect button I, a stereo chorus on effect button II, a dotted 8th tape-style delay on button III and a big bright reverb on button IIII. There is also a small plate reverb automatically active on every profile to make trialing them more pleasant in headphones!

Profile Overview

01 - Top Hat AC 15 Side, Lo Input, Fat Switch, V 09

02 - Top Hat AC 15 Side, Hi Input, Fat Switch, V 09

03 - Top Hat AC 15 Side, Lo Input, Fat Switch, V 11

04 - Top Hat AC 15 Side, Lo Input, Bright Switch, V 11

05 - Top Hat AC 15 Side, Lo Input, Fat Switch, V 09 - TIMMY

06 - Top Hat AC 15 Side, Lo Input, Fat Switch, V 12

07 - Top Hat AC 15 Side, Lo Input, Fat Switch, V 09 - BIGFOOT ENGINEERING KING FUZZ

08 - Top Hat AC 15 Side, Lo Input, Fat Switch, V 09 - THORPY FX GUNSHOT

09 - Top Hat AC30 Side, Lo Input, B10, M11, T12, V03, G11

10 - Top Hat AC30 Side, Lo Input, B10, M11, T12, V03, G11 - TIMMY

11 - Top Hat AC30 Side, Lo Input, B10, M11, T12, V03, G11 - THORPY FX GUNSHOT

12 - Top Hat AC30 Side, Lo Input, B09, M11, T11, V3.5, G01 - KEELEY COMP+

Installing via Rig Manager

  • Download Rig Manager at https://www.kemper-amps.com/downloads and install

  • Open the folder containing the Profiles you purchased from Multitracks.com and drag them into the Rig Manager App. They will show up in the local files tab in the app.

  • Connect your Kemper Profiler via USB cable to your computer and drag all the new Profiles to your Kemper. This can be done by dragging from the Local Files tab to the My Profiler tab.

  • Enjoy your new amp Profiles!

Installing via USB Thumb Drive

  • Take the USB that's been formatted for firmware updates and plug it into your PC/MAC.

  • Open folder named Shared and copy all the Profiles you purchased from Multitracks.com to this folder

  • Plug the USB in. Kemper should see the USB pretty quickly.

  • Inside the Kemper OS, push the external storage button.

  • Select Import.

  • Enjoy your new amp Profiles!

Did this answer your question?