All Collections
Sounds: Guitar Profiles
Brian Carl
Getting Started with The Stage by Brian Carl
Getting Started with The Stage by Brian Carl

Getting Started with The Stage by Brian Carl

Jesse Schaefer avatar
Written by Jesse Schaefer
Updated over a week ago

The Stage by Brian Carl is designed for the Kemper Stage and Kemper Remote users. Brian has essentially recreated his pedalboard within the Kemper, dialing-in the internal drives, delays and reverbs to match the iconic sounds he's used on many recordings.

"If I’m playing out or doing a session without my physical pedalboard and use the Kemper exclusively, this is 100% where I pull from. From the sound I like for drives, delays, and verbs, to my favorite amps and how I run them, this pack is a true representation of my sound and covers everything I need for excellence in any environment. " - Brian Carl

Included are 5 different performances, each using a different amp profile, tailored to best fit the different guitars Brian loves to play (Jazzmaster, Gretsch, Telecaster, etc). Brian has also included 5 song specific performances that showcase the power of these profiles. The songs include are:

  • Build My Life

  • Follow You Anywhere

  • Glorious Day

  • Holy Ground

  • Welcome the Healer


Installing via Rig Manager

  • Download Rig Manager at https://www.kemper-amps.com/downloads and install

  • Open the folder containing the Profiles you purchased from Multitracks.com and drag them into the Rig Manager App. They will show up in the local files tab in the app.

  • Connect your Kemper Profiler via USB cable to your computer and drag all the new Profiles to your Kemper. This can be done by dragging from the Local Files tab to the My Profiler tab.

  • Enjoy your new amp Profiles!

Installing via USB Thumb Drive

  • Take the USB that's been formatted for firmware updates and plug it into your PC/MAC.

  • Open folder named Shared and copy all the Profiles you purchased from Multitracks.com to this folder

  • Plug the USB in. Kemper should see the USB pretty quickly.

  • Inside the Kemper OS, push the external storage button.

  • Select Import.

  • Enjoy your new amp Profiles!

Did this answer your question?