All Collections
Sounds: Guitar Profiles
Jonny Bird
Getting Started with Falcon 30 by Jonny Bird
Getting Started with Falcon 30 by Jonny Bird

Getting Started with Falcon 30 by Jonny Bird

Jesse Schaefer avatar
Written by Jesse Schaefer
Updated over a week ago

The Falcon 30 by Jonny Bird is a Kemper bundle offering tones from highly sought after overdrive pedals paired with one of UK's most famous 30 watt guitar amps. The base for these profiles is a British 30 watt amp with a pair of Alnaco Blue speakers running into a Neve 1066 preamp. The lower gain profiles are perfect for an "always on" style playing, and the higher gain profiles are perfect with a beautiful delay and reverb for a singing lead tone.

Some of the drives baked into these profiles are:

  • 1981 Inventions

  • JHS Superbolt

  • JHS Kilt

  • Bondi Breakders

  • Bondi Sick As

  • Benson Preamp

  • NRG Purrer

Installing via Rig Manager

  • Download Rig Manager at https://www.kemper-amps.com/downloads and install

  • Open the folder containing the Profiles you purchased from Multitracks.com and drag them into the Rig Manager App. They will show up in the local files tab in the app.

  • Connect your Kemper Profiler via USB cable to your computer and drag all the new Profiles to your Kemper. This can be done by dragging from the Local Files tab to the My Profiler tab.

  • Enjoy your new amp Profiles!

Installing via USB Thumb Drive

  • Take the USB that's been formatted for firmware updates and plug it into your PC/MAC.

  • Open folder named Shared and copy all the Profiles you purchased from Multitracks.com to this folder

  • Plug the USB in. Kemper should see the USB pretty quickly.

  • Inside the Kemper OS, push the external storage button.

  • Select Import.

  • Enjoy your new amp Profiles!

Did this answer your question?