Once you've connected your QuickBooks Desktop (QBD) company file to Nickel, there are a few things worth understanding about how the two systems talk to each other.
If you haven't finished the initial connection yet, complete the step-by-step setup guide first, then come back here.
Keep the QuickBooks Web Connector Running
Nickel syncs with QuickBooks Desktop through Intuit's QuickBooks Web Connector — a small utility that runs alongside QuickBooks. This is the single most important thing to know:
If the Web Connector isn't running, nothing syncs.
A few recommendations:
Leave the Web Connector open as much as possible on the computer where your company file lives.
Make sure Auto-Run is checked on the Nickel row so it syncs on a schedule without you clicking anything.
If you reboot the machine, confirm the Web Connector relaunches. You can set it to start automatically with Windows.
You'll know it's working when you see a row labeled Nickel - Your Company Name inside the Web Connector window, with a recent "Last run" timestamp.
What to Expect During the Initial Sync
The first sync after connecting takes longer than later ones. Nickel pulls your full history from QuickBooks Desktop in batches, so a company file with a lot of history can take a while to fully populate.
During this first sync (and sometimes during later ones), don't be surprised if you see:
The progress bar bouncing around — for example, going from 80% back down to 75% and then climbing again. This is normal. The connector is working through batches, not a single linear job.
Progress that never hits exactly 100% — Nickel polls for changes in the background, so there's almost always a small amount of activity even when nothing obvious is happening. A status like "Sending request to QuickBooks" or "Sending response back to application" means things are healthy.
A status of "Waiting... Another service is updating" — this is also normal. It means another sync job is ahead of Nickel in the queue, and Nickel will start as soon as that one finishes. No action needed.
Give the initial sync several minutes before assuming something is wrong. Your invoices, customers, bills, and vendors will populate into Nickel as they come across.
Manual Syncs vs. Automatic Syncs
Nickel will automatically attempt a sync roughly once per hour, but automatic syncing is not foolproof. The connection can be interrupted by things like:
The computer being turned off or asleep
QuickBooks Desktop being closed
The Web Connector being closed
Network interruptions
Because of this, it's a good habit to run a manual sync any time you need to be sure Nickel and QuickBooks are fully aligned — for example, right before sending out end-of-month invoices, or if you created something in QBD and don't see it in Nickel yet.
To trigger a manual sync, make sure QuickBooks Desktop and the Web Connector are running, then in Nickel open your Invoices, Bills or Customers list, click QB Sync, choose Sync since…, pick a date on or before the oldest change you need, and click Sync. Clicking Update Selected in the Web Connector does not by itself pull new records into Nickel.
Heads up: To confirm the connection is active, choose Check connection from the same QB Sync menu. The dot next to QB Sync is green when the connection is active and red when Nickel can't reach QuickBooks Desktop.
The QuickBooks Icon: Which Invoices Sync Payments Back?
Invoices in Nickel can come from two places:
Invoices synced from QuickBooks Desktop
These show a small QuickBooks icon next to the customer name in Nickel. When a customer pays one of these invoices, Nickel will automatically attempt to sync the payment back to QBD and apply it to the correct invoice.
Invoices created directly in Nickel
These do not have the QuickBooks icon. They were never in QBD to begin with, so when a customer pays one, Nickel has no QBD invoice to tie the payment to.
What this means in practice: if you create an invoice in Nickel (rather than in QBD) and your customer pays it, you'll need to manually reconcile that payment in QuickBooks. It won't flow back automatically.
The rule of thumb: if you want end-to-end automation on payment reconciliation, create your invoices in QuickBooks Desktop and let them sync into Nickel.
Invoices are Prepared, Not Auto-Sent
When a new invoice syncs from QBD into Nickel, Nickel does not automatically email it to your customer. Instead, the invoice is staged and ready to send — you still choose when and how to deliver it.
This gives you a chance to review, adjust, or batch invoices before customers see them.
Best-Practice Workflow at Month-End
Putting all of the above together, here's a reliable end-of-month flow:
Create your invoices in QuickBooks Desktop as usual.
Open the QuickBooks Web Connector and make sure it's running.
Log into Nickel, open your Invoices list, click QB Sync, choose Sync since… and pick a date to run a manual sync.
Confirm the new invoices are there.
Send the invoices to your customers from Nickel.
As customers pay, payments on QBD-sourced invoices will sync back automatically. For any invoices you created directly in Nickel, reconcile the payment manually in QBD.
Troubleshooting Checklist
If something doesn't look right, run through this list:
Is QuickBooks Desktop open? The company file needs to be open for syncs to run.
Is the Web Connector open? Check your taskbar. It's easy to close by accident.
Is the Nickel row checked and set to Auto-Run? An unchecked row won't sync on the schedule.
Did you recently reboot? Confirm the Web Connector came back up.
Expecting a specific invoice to appear in Nickel? Invoices already marked paid in QBD are not brought into Nickel. For an open invoice, run a manual sync with Sync since… set to a date on or before the invoice's "last modified" date in QBD.
Sync appears stuck? Wait a few minutes — "Waiting... Another service is updating" and fluctuating progress bars usually resolve on their own.
Quick Reference
Situation | What it means |
Progress bar fluctuates: e.g., between 75% - 80% or 90% - 95% | Normal — connector is working through batches |
"Waiting... Another service is updating" | Normal — Nickel is queued behind another sync |
Progress never reaches 100% | Normal — Nickel polls for changes continuously |
Web Connector is closed | Syncs will not run. Reopen it. |
Invoice has a QB icon in Nickel | Payments will sync back to QBD automatically |
Invoice has no QB icon in Nickel | Created in Nickel — reconcile payments in QBD manually |
You just created an invoice in QBD and want it in Nickel now | Run a manual sync in Nickel via QB Sync → Sync since… |
Need help?
If you have questions, please chat with our team via the Help Center when you login to the platform.