MCI

MCI phone setup

Andy Ruff avatar
Written by Andy Ruff
Updated over a week ago

MCI

Setup Instructions

  1. Lift the receiver on your business phone and listen for the dial tone

  2. Dial *92 followed by the call forwarding number assigned to you by Numa

  3. Listen for a confirmation tone, this will indicate that "call forward no answer" has been successfully activated

  4. Lift the receiver again and listen for the dial tone

  5. This time, dial *68 followed by the call forwarding number assigned to you by Numa

  6. Listen for the confirmation tone that indicates that "call forward busy" has been successfully activated

How to Confirm It's Working

You can place a test call by going to Settings > Phone numbers > Test my setup or call your business's phone number from your personal phone. If nobody answers, you should hear your Numa Voicemail greeting.

Troubleshooting

Make sure you don't have an answering machine picking up your calls before they get forwarded.

If your business's phone line is part of a hunt group (multiple lines that ring until one is answered), you may need to set up forwarding on all the lines involved. Alternatively, you could remove your business phone line from the hunt group.

Contact your phone provider and have them double check that forwarding was set up properly and is active on your line.

Turn off Call Forwarding

  1. Call Forwarding No Answer: Press *93

  2. Call Forwarding Busy: Press *88

No matter what, don't hesitate to contact Numa support! We'll happily work with you and your service provider to get you all set up.

Did this answer your question?