Step 1: Open the NxHUB Setup from the Devices Menu
Navigate to the Devices menu in your application
Step 2: Set Up NxHUB Device
Select Set Up NxHUB Device to begin the configuration process.
Step 3: Plug In
Plug your NxHUB into a power outlet. Once powered on, the device will be discoverable for 3 minutes. For the smoothest setup, plug in only one NxHUB at a time. Tap Start Scanning to begin.
Step 4: Find Device
When your NxHUB device appears in the detected devices list, select it and tap Next to proceed to the WiFi configuration step.
Step 5: Connect the NxHUB to the Clinic WiFi
Select your Wi-Fi network from the list. In this example, we select Clinic-WiFi-5G. Enter the password, confirm it, then tap Save Credentials.
Step 6: Perform a Test Recording
Press the NxHUB button to start a test recording and follow the on-screen instructions. When the test is complete, click the button to stop the recording.
Step 7: Set the Operating Mode to Auto
Click Continue, then select Auto Mode as the device's operating mode. Click Apply and Continue to save this configuration and proceed.
Step 8: Finish and Return to the Dashboard
Click the Done button to complete the setup and return to the main dashboard.