An important element of Parkn'Sleep is the signalization and check-in opportunity on site. The site can be equipped with the following signs as needed. These signal to arriving campers where they can park, check-in and pay for their stay.

Note: In principle, the Parkn'Sleep check-in system can be integrated on any pitch, regardless of whether it is already listed in directories such as Park4Night, Stellplatz.info or Campercontact for example. For reservation platforms or campsites, it is necessary to ensure that the availability of the Parkn'Sleep pitches is guaranteed at all times. This can be adjusted in the system at any time.

Aluminium 4mm / 50cm x 70cm

The sign is made of high quality aluminum printing. It is weather resistant and suitable for use in large places. The dimension corresponds to the standard parking sign size. The sign is not pre-drilled and can be mounted individually.

The Check-In Point is placed clearly visible at the entrance or at a prominent place. By scanning the QR code, the camper can directly access the check-in area of the pitch advertisement without downloading an app. The Check-In Point serves as a signalization and payment point for arriving campers.

Required material: Drilling machine, drill bit 6.5, measuring tape, suitable fastening material (M-screws or wood screws), screwdriver.

For mounting on metal or wooden post, pre-drill 2 holes on the center line and fasten the sign accordingly. For mounting in a standard sign frame 50 x 70cm, the holes are drilled accordingly in the corners. Also, mounting directly on a wall is possible.

The sign is made of high quality aluminum printing. It is weather resistant and suitable for single place signage. The sign is not pre-drilled and can be mounted individually.

The sign tells the camper where he may park his vehicle and is mounted directly in front of or next to the parking space. This sign also contains a QR code and therefore functions independently of the check-in point as a payment point and specific signalization of the individual space. For spaces with other systems (reservation platforms, parking meter), this signage is recommended. The availability of the single space must be guaranteed at all times. Parked vehicles must check in via Parkn'Sleep.

Required material: Drilling machine, drill bit 6.5, measuring tape, suitable fastening material (M-screws or wood screws), screwdriver. For mounting on the metal or wooden post, pre-drill 2 holes on the center line and fasten the sign accordingly. The same procedure applies for wall mounting.

Plastic 14cm x 19cm

The sticker is made of weather-resistant material and is suitable for use on parking meters or, for example, entrance areas and glass doors.

The sticker serves as a signalization and payment point for arriving campers. For sites with a parking meter, the sticker is recommended in combination with the single space signage. Also for hotel entrances or campsites with reception.

The sign is made of a high quality aluminum printing. It is printed on both sides and can be used for both directions depending on the visible side.

The sign arrow shows the arriving camper the way to the pitch / check-in point. It is intended for remote places where the access is not clearly visible. For example, for nature sites or agrotourism.

The signage will be sent to you after the first activation of a pitch on www.parknsleep.app.

Which signs are suitable for my pitch type?

You can order your individual signage here for free.

For a consultation you can contact us at support@parknsleep.app.