Skip to main content

Gable: common questions

There are three ways it can happen. Someone confirmed a categorize or approve card (your own show in Activity → Recent activity as You…

M
Written by Michael Bollinger

Why did Gable change my transaction's category?

There are three ways it can happen. Someone confirmed a categorize or approve card (your own show in Activity → Recent activity as You approved, with the time). The category Gable suggested on For review was accepted when someone clicked Approve. Or an administrator set Autopilot's Transaction categories area to Auto, which lets Gable apply categories at or above a confidence the administrator chose; those are listed in Activity under Autopilot, marked Auto, with Undo. On Suggest, which is how the area starts, the morning sweep only stages suggestions and never approves them. To put a category right, open the transaction with ⋯ → View details, pick the Category and click Update. See Review and categorize transactions.

Gable set a category and I can't change it back. Why?

Gable doesn't lock a category. A category Gable applied can be changed like any other: on Transactions, click ⋯ → View details on the row, pick the Category and click Update. No setting, rule or Autopilot level makes a category read-only, and once a person has picked a category, neither Gable nor a transaction rule replaces it. When the category can't be changed that way, it's because of the kind of transaction, whoever set it. These are the cases, and where to change each one.

The transaction is

What you see

Where to change the category

A bill payment from Payables

The details are headed Payable details and list the bill's Categories with no picker. In a bulk change: "payables take their category from the bill"

Click Edit payable, or open the bill in Payables and edit its category there

Split across several categories

N Categories in the Category column. In a bulk change: "split lines keep their own categories"

Click N Categories, open the split line, change its Category and click Save changes. Undo split turns it back into one transaction with one category

A journal entry

A Journal badge instead of a category. In a bulk change: "journal entries are edited in the entry"

Open it and click Edit to change the entry's lines. If Edit is greyed out with "This journal entry is approved. Unapprove it before editing.", click Undo approve on the entry's row first, then Approve again after the change. See Edit, copy or delete a journal entry

A transfer

Transfer to … or Transfer from … in the Category column: "transfers have no category"

Open it and click Convert to transaction, then pick a category. A transfer on your PayHOA financial account can't be converted

A deposit with owner payments, or a PayHOA deposit

The category opens the deposit: "deposits take their categories from their payments"

Open the deposit and change the Category on the line for that payment

A PayHOA financial account transaction opened from inside another one (one line of a deposit or payout), or a transfer on that account

The Category box is greyed out, or saving shows "This field cannot be edited on treasury transactions."

It can't be changed from your account. Contact PayHOA support

Any transaction, when you have read-only access

Every field is greyed out and there's no Update button

Ask an administrator to give you write access to transactions

Is there an automatic setting that keeps putting the category back? Not one that overrides you. Autopilot's Transaction categories area on Auto, and your transaction rules, only fill in transactions that have no category. So a category you pick stays. The one way it comes back: if you clear the category to Uncategorized, the transaction counts as new again, and Gable or a matching rule can categorize it on the next weekday morning. Pick the category you want instead of clearing it, or set Transaction categories to Off (Other Tools → AI Settings → Autopilot).

To undo a category Gable applied on its own, open Other Tools → AI Settings → Activity, find the entry under Autopilot (Categorized … as …, marked Auto) and click Undo. If you see "Someone changed this transaction after Gable did, so Undo would overwrite their change.", the category has already been changed by a person; edit the transaction instead.

If it's an ordinary transaction, you changed the category, clicked Update and the old one came back, reload the page and try once more. If it still reverts, contact PayHOA support with the bank account, the transaction's date and amount, the category it shows, the category you want and a screenshot of the open transaction. See If a transaction's category won't change.

Can Gable pay a bill?

Not on its own. With your confirmation, Gable can schedule the payment of an approved bill (a mailed check, Bill Pay, or ACH from your PayHOA financial account) or mark it as paid; nothing happens until you click Schedule payment or Mark as paid on the card. Gable can also propose approving a payable, and that proposal is a card you confirm; it counts as your own vote in the normal approval flow. If the bill was sent for approval with a payment method already chosen, the approval that completes the rule schedules the payment, exactly as it would on the Payables page. A bill sent as approval only stays approved until someone schedules the payment. Cancelling a bill payment is a card too. See Approve payables.

Did Gable email the owner?

Only if someone clicked the send button on a card (Send email, Send reply, Send reminder and so on), or an administrator set an Autopilot area that sends email, such as Overdue reminders or Violation steps, to Auto. A draft sitting in a chat hasn't gone anywhere. To check, open Activity (Recent activity for cards, Autopilot for what Gable sent on its own), or look at the unit's Communications tab and the Inbox. See The communications log.

How do I undo what Gable did?

The same way you'd undo any change in PayHOA: reinstate the invoice, change the status back, unlink the payment, click ⋯ → Undo match on a matched transaction, delete the rule, and so on. Activity lists the cards you confirmed and when, so you know what to look for. For something Autopilot did on its own, open Activity, find it under Autopilot and click Undo if the entry has one. Emails and text messages that were sent can't be unsent.

Why doesn't my association see Gable?

Either Gable has been turned off for your association or for you, or you're not an administrator and haven't been given the Gable permission. An administrator can add the permission in People → Permissions, and can turn Gable back on for the association under Other Tools → AI Settings → Gable settings → Turn Gable on. If that tab says "Gable was turned off by PayHOA support," or Gable is off for one administrator only, contact PayHOA support. See Turn Gable on or off and Give board members and staff access.

Where is Gable on the screen? Is it the chat button in the corner?

No. Gable opens from the AI Assistant button (the sparkle icon) in the bar across the top of every page, and from the Ask Gable bars on some pages. The round chat button floating in the bottom left corner of the screen is the support chat: it reaches PayHOA support, not Gable. Owners don't have Gable; where their association has turned it on, they see Ask at the top of the page, which opens Penny. See Gable overview and Contact PayHOA support.

I can't type in Gable's question box, or the microphone doesn't work.

Work through these, then contact support if it still fails:

  1. Gable is still answering. The box is locked while Gable writes its answer. Wait for it to finish, or click the stop button in the box.

  2. Gable asked you a question. When Gable needs a choice from you, the question box is replaced by its question. Answer it and the box comes back.

  3. Start again. Reload the page, open AI Assistant and click Start new chat (the plus icon).

  4. The microphone banner. If you see "Gable can't use your microphone — access is blocked for this site, and nothing was recorded. Allow the microphone in your browser's site settings, then tap the mic again.", your browser is blocking the microphone for PayHOA. Allow it in the browser's site settings and click the mic again. Voice input depends on the browser: if the box has no mic icon, your browser doesn't support it, and you can still type.

If you still can't type after reloading, or it happens in more than one browser, contact PayHOA support with the browser and device you're using, the page you were on and a screenshot of the Gable panel showing any banner.

How much does Gable cost? Is Gable free, or is it extra?

Gable AI is free while it's in beta. If your association doesn't want to use Gable, an administrator can turn it off for everyone under Other Tools → AI Settings → Gable settings. See What Gable costs.

How do I turn Gable off?

An administrator goes to Other Tools → AI Settings → Gable settings and clicks Turn Gable off under Gable for the whole community. That turns Gable off for everyone in the association, and Ask Penny in the homeowner portal with it, until an administrator turns it back on. If you only want less of Gable on your own screen, use Where Gable shows up for you and Gable suggestions on each page on the same tab; those change nothing for your teammates. See Turn Gable on or off. Gable is free while it's in beta; see What Gable costs.

Can Gable be paused or disabled? Do I have to email support?

You don't need support to turn Gable off or pause it. An administrator can turn Gable off for the whole association with Turn Gable off on Other Tools → AI Settings → Gable settings, and turn it back on in the same place with Turn Gable on. To pause only the work Gable does in the background and keep the chat, open Other Tools → AI Settings → Autopilot and click Pause all, or set single areas to Off. Support is needed only to turn Gable off for one administrator, or to turn it back on when the tab says "Gable was turned off by PayHOA support." See Turn Gable on or off.

How do I turn off automatic categories on bank transactions?

An administrator sets Autopilot's Transaction categories area to Off: go to Other Tools → AI Settings → Autopilot, find Transaction categories and choose Off. Gable then stops suggesting categories for new bank transactions, and the weekday-morning sweep stops. You don't need PayHOA support for this. Your transaction rules still apply, and a new transaction with the same description as one you've already approved still gets that category. See Review and categorize transactions.

Did Gable do something without asking me?

Only if an administrator set an Autopilot area to Auto. Open Other Tools → AI Settings → Autopilot to see each area's level and what it Runs without asking. Everything Auto did is in Activity under Autopilot. To stop it, set the area to Suggest or Off, or click Pause all. See Let Gable work ahead with Autopilot.

Why can't Gable do something in a module?

Two common reasons. You don't have write permission in that module — Gable tells you so plainly. Or the feature isn't turned on for your association, such as the Tasks module or bulk actions. A few things are never available through Gable, such as printing checks or changing settings that only PayHOA can change. See Gable in each module for what each module needs.

Why did a suggestion disappear?

Suggestions expire after three days if nobody acts on them (Expired in Activity), are replaced when Gable proposes something newer (the old card reads Earlier version · replaced by the update below), or are marked Handled already when the record was handled another way, such as the reply being sent or the status being changed by hand. Cards from workflow runs expire the same way. A snoozed suggestion comes back the next morning.

Why does Gable suggest things I didn't ask for?

Gable watches requests, violations, amenity bookings, invoice replies, inbox replies and bank transactions in the background, and any workflows or Autopilot areas your administrators set up add to that. Dismiss a suggestion with a reason (Not needed right now, I'll handle this manually, Gable got this wrong, Against our policy) so it learns. If you'd rather Gable left your transactions or requests alone, an administrator can set Transaction categories, Payment and transfer matching or Request replies to Off under Other Tools → AI Settings → Autopilot.

Why are Workflows, Skills and Autopilot missing from my rail?

They show for administrators only, and only inside an association (not in a management company's portfolio view). Board members and staff who use Gable through the Gable permission see Activity, Instructions, AI settings and the chat list, but not Workflows, Skills or Autopilot.

I closed an Ask Gable bar. How do I get it back?

Go to Other Tools → AI Settings → Gable settings. Under Gable suggestions on each page, click Show again beside the page, or Show all again. The same list brings back the dashboard's Meet Gable card.

Why don't my teammates see my Instructions?

Instructions are personal: "They apply to your chats only, not your teammates'." For a rule that should shape Gable's work for everyone in your association, an administrator can create a Skill instead. See Teach Gable what you want.

Can Gable see other associations?

No. Gable only reads the association you have open. If you belong to more than one, switch associations and ask again.

Will Gable give out bank account numbers, passwords or other sensitive details?

No. Gable can't read full bank account or routing numbers, the cards and bank accounts owners have saved for paying, passwords, sign-in and two-step verification codes, or the keys that connect your bank and payment processor, so it can't give them out however the question is worded. For a bank account it sees the name and the last four digits, never the full number. Gable also reads only the association you have open, and only what your own permissions let you see. See What Gable won't do.

No. Gable can quote your governing documents from your Documents library and name the document it used, so you can check the wording yourself. That isn't legal advice, and Gable isn't a substitute for your association's attorney. For a question about state law, or about how a rule applies to a dispute, ask your attorney.

What should I ask Gable to do? Are there examples?

Yes. Three jobs to try first: ask Gable to draft next year's budget from this year's actuals, to compare the vendor quotes you've collected for one job side by side, or to build a board executive summary for the last six months and then email it to the board. Each is carried through, with what Gable produces and what you approve, in What to ask Gable for: three example jobs. For the full list by area, see Gable in each module.

Can homeowners use Gable?

No. Gable is for administrators and board members. Owners can get Ask Penny, a separate assistant that answers from the documents you share and PayHOA's homeowner help, if it's available for your association and you turn it on in Other Tools → AI Settings → Penny settings. See Ask Penny, your HOA assistant.

How do I turn on Gable for homeowners (the AI assistant in the homeowner portal)?

The homeowner assistant is called Penny, not Gable. "Gable for homeowners", "Gable in the portal" and "the AI chatbot for owners" all mean Penny. To turn Penny on in the homeowner portal:

  1. Go to Other Tools → AI Settings → Penny settings. The old path was Other Tools → AI Chatbot Settings. You need Website Builder write permission to see the tab.

  2. Under Where AI chatbot appears, turn on the switch on the Homeowner portal row (Logged-in homeowners only).

  3. Under Knowledge base, open Community documents, add the documents Penny should answer from and tick Portal for each.

  4. Optional: under AI chatbot customization, set the Welcome message and the Community name (for context). Then ask a few questions owners are likely to ask under Test your chatbot, on the Portal view, to check Penny is answering from the right documents.

Owners then see an Ask button at the top of their portal. Once they start using it, the top of the same tab shows Conversations this month, Questions answered, Avg. response time and Satisfaction rate.

Gable can't turn Penny on or change Penny's settings for you; an administrator does it on this tab. See Ask Penny, your HOA assistant.

There's no Homeowner portal option in the AI chatbot settings. Why?

If Where AI chatbot appears on Penny settings shows only the Website row, Penny in the homeowner portal hasn't been enabled for your association yet. You can't add the row yourself, and it won't appear by waiting. Contact PayHOA support, say you want the AI chatbot (Penny, sometimes called Gable for homeowners) turned on for the homeowner portal, and include your association's name and a screenshot of the Penny settings tab. If you can't see the Penny settings tab at all, you need Website Builder write permission.

The answer was wrong. What should I do?

Click thumbs down, pick a reason (Wrong data, Missed nuance, Wrong tone, Off-topic or Other), add a note and click Send feedback. If it caused a problem, ask Gable to contact PayHOA support; it drafts an email with the records involved for you to review and click Send to support.

Does Gable use my data to train AI?

No. Gable data is not used to train the AI models, and PayHOA has zero data retention in place with the model providers, so the model providers don't keep your data.

Gable reads your association's data to answer you and to draft suggestions, and only what your permissions allow. Chats are stored for the person who had them; a chat unused for 30 days moves to Archived chats. Other administrators on your account don't see what you ask.

What does "Gable can make mistakes" mean for financial numbers?

Treat a figure in a chat answer as a lead, not the record. Open the Citations under the answer to see where it came from, and when Gable gives you a report card, use the PDF or CSV it generated as your source of truth, since those are the same reports the Reports page produces.

Related

Did this answer your question?